Garmin Drive™‎ 53 Owner's Manual

GARMIN DRIVE

™

53

Owner’s Manual

or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to

www.garmin.com for current updates and supplemental information concerning the use of this product.

Garmin

and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. These trademarks may not be used without the express

permission of Garmin.

Garmin Drive

™

and Garmin Express

™

are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.

Foursquare

is a trademark of Foursquare Labs, Inc. in the U.S. and in other countries. microSD

and the microSDHC logo are trademarks of SD-3C, LLC. Tripadvisor

is a registered

trademark of Tripadvisor LLC. Windows

is a registered trademark of Microsoft Corporation in the United States and other countries.

Table of Contents

Getting Started................................. 1

Garmin Drive 53 Device Overview.......... 1

Mounting Considerations....................... 1

Mounting and Powering the Garmin

Drive Device in Your Vehicle............... 2

Turning the Device On or Off.................. 3

Acquiring GPS Signals............................ 4

Status Bar Icons...................................... 4

Using the On-Screen Buttons................. 4

Adjusting the Volume..............................4

Using the Audio Mixer......................... 4

Enabling or Disabling Sounds and

Audio Sources..................................... 5

Adjusting the Screen Brightness............ 5

Driver Awareness Features and

Alerts............................................... 5

Enabling or Disabling Driver Alerts.........5

Finding and Saving Locations........... 6

Finding a Location Using the Search

Bar............................................................ 6

Finding an Address................................. 6

Location Search Results......................... 7

Changing the Search Area...................... 8

Points of Interest..................................... 8

Finding a Location by Category.......... 8

Finding National Parks........................ 9

Foursquare........................................... 9

Tripadvisor........................................... 9

Navigating to Points of Interest Within

a Venue.............................................. 10

Search Tools..........................................10

Finding an Intersection..................... 10

Finding a Location Using

Coordinates....................................... 10

Parking................................................... 10

Finding Parking Near Your Current

Location............................................. 10

Finding Parking Near a Specified

Location............................................. 11

Viewing Recently Found Locations...... 11

Clearing the List of Recently Found

Locations........................................... 11

Viewing Current Location

Information............................................ 11

Finding Emergency Services and

Fuel..................................................... 11

Getting Directions to Your Current

Location............................................. 11

Adding a Shortcut................................. 11

Removing a Shortcut......................... 12

Saving Locations................................... 12

Saving a Location.............................. 12

Saving Your Current Location........... 12

Editing a Saved Location.................. 12

Assigning Categories to a Saved

Location............................................. 12

Deleting a Saved Location................ 13

Following a Route........................... 13

Routes.................................................... 13

Starting a Route.....................................13

Starting a Route by Using the Map...13

Going Home....................................... 13

Your Route on the Map......................... 14

Viewing Turns and Directions...........15

Viewing the Entire Route on the

Map.................................................... 15

Arriving at Your Destination................. 15

Parking Near Your Destination......... 15

Changing Your Active Route.................16

Adding a Location to Your Route..... 16

Shaping Your Route...........................16

Taking a Detour................................. 16

Changing the Route Calculation

Mode.................................................. 16

Stopping the Route............................... 16

Avoiding Delays, Tolls, and Areas........ 17

Avoiding Traffic Delays on Your

Route.................................................. 17

Avoiding Toll Roads.......................... 17

Avoiding Road Features.................... 17

Custom Avoidances.......................... 17

Using the Map................................ 18

Map Tools.............................................. 18

Viewing a Map Tool...........................18

Up Ahead............................................... 18

Viewing Upcoming Locations........... 19

Table of Contents i

Customizing the Up Ahead

Categories..........................................19

Cities Ahead.......................................... 19

Viewing Upcoming Cities and Exit

Services..............................................19

Trip Information.................................... 19

Viewing Trip Data from the Map...... 19

Viewing Trip Data.............................. 19

Viewing Your Trip History................. 20

Resetting Trip Information................20

Viewing Upcoming Traffic.................... 20

Viewing Traffic on the Map.............. 20

Searching for Traffic Incidents......... 20

Customizing the Map............................ 20

Customizing the Map Layers............ 20

Changing the Map Data Field........... 20

Changing the Map Perspective........ 21

Traffic............................................ 21

Receiving Traffic Data Using a Traffic

Receiver................................................. 21

Enabling Traffic..................................... 21

Viewing Traffic on the Map.................. 21

Searching for Traffic Incidents......... 22

Using the Apps............................... 22

Viewing the Owner's Manual on

YourDevice............................................22

Route Planner........................................ 22

Planning a Route............................... 22

Editing and Reordering Locations in a

Route.................................................. 22

Changing Routing Options for a

Route.................................................. 23

Navigating to a Saved Route............ 23

Editing and Saving Your Active

Route.................................................. 23

Viewing Previous Routes and

Destinations.......................................... 23

Settings..........................................23

Map and Vehicle Settings..................... 23

Enabling Maps................................... 23

Navigation Settings............................... 24

Calculation Mode Settings............... 24

Setting a Simulated Location........... 24

Driver Assistance Settings................... 24

Proximity Alerts Settings.................. 24

Display Settings.....................................25

Traffic Settings...................................... 25

Units and Time Settings....................... 25

Setting the Time................................ 25

Language and Keyboard Settings........ 25

Device and Privacy Settings................. 25

Resetting Data and Settings............. 26

Device Information......................... 26

Viewing E-label Regulatory and

Compliance Information....................... 26

Specifications........................................26

Charging the Device.............................. 26

Device Maintenance....................... 26

Garmin Support Center......................... 26

Map and Software Updates.................. 27

Updating Maps and Software with

Garmin Express™............................... 27

Device Care............................................28

Cleaning the Outer Casing................ 28

Cleaning the Touchscreen................ 28

Avoiding Theft................................... 28

Restarting the Device............................ 29

Removing the Device, Mount, and

Suction Cup........................................... 29

Removing the Device from the

Mount................................................. 29

Removing the Mount from the Suction

Cup..................................................... 29

Removing the Suction Cup from the

Windshield......................................... 29

Troubleshooting............................. 29

I cannot adjust the screen brightness on

my device............................................... 29

The suction cup will not stay on my

windshield..............................................29

My device is not acquiring satellite

signals....................................................29

My battery does not stay charged for

very long................................................ 29

Appendix........................................ 30

Installing a Memory Card for Maps and

Data........................................................ 30

Data Management................................ 30

ii Table of Contents

About Memory Cards........................ 30

Connecting the Device to Your

Computer........................................... 30

Transferring Data From Your

Computer........................................... 30

Disconnecting the USB Cable........... 30

Viewing GPS Signal Status................... 31

Purchasing Additional Maps................ 31

Purchasing Accessories....................... 31

Table of Contents iii

Getting Started

WARNING

See the Important Safety and Product Information guide in the product box for product warnings and other

important information.

• Update the maps and software on your device (Map and Software Updates, page27).

• Mount the device in your vehicle and connect it to power (Mounting Considerations, page1).

• Acquire GPS signals (Acquiring GPS Signals, page4).

• Adjust the volume (Adjusting the Volume, page4) and display brightness (Adjusting the Screen Brightness,

page5).

• Navigate to your destination (Starting a Route, page13).

Garmin Drive 53 Device Overview

Power key

USB power and data port

Map and data memory card slot

Mounting Considerations

• Do not mount the device in a location that obscures the driver's view of the road.

WARNING

It is your responsibility to ensure the mounting location complies with all applicable laws and ordinances, and

does not block your view of the road during the safe operation of your vehicle.

• Choose a location that allows you to route the power cable safely.

WARNING

When installing the device in a vehicle, install the device and power cable securely so they do not interfere with

the vehicle operating controls. Interference with the vehicle operating controls can result in a collision, which

could result in injury or death.

• Choose a location that is within easy reach.

• Thoroughly clean the windshield before installing the mount.

Getting Started 1

Mounting and Powering the Garmin Drive Device in Your Vehicle

WARNING

This product contains a lithium-ion battery. To prevent the possibility of personal injury or product damage

caused by battery exposure to extreme heat, store the device out of direct sunlight.

Before you use your device on battery power, you should charge it.

1 Press the suction cup to the windshield, and flip the lever back toward the windshield.

2 Press the mount onto the suction cup ball until it snaps into place.

3 Plug the vehicle power cable into the USB port on the device.

2 Getting Started

4 Plug the other end of the vehicle power cable into a power outlet in your vehicle.

5 Fit the tab on the top of the mount into the slot on the back of the device, and press the bottom of the mount

into the device until it clicks.

Turning the Device On or Off

• To turn the device on, press the power button , or connect the device to power.

• To put the device in power saving mode, press the power button while the device is on.

While in power saving mode, the screen is off and the device uses very little power, but it can wake instantly

for use.

TIP: You can charge your device faster by putting it in power saving mode while charging the battery.

• To turn off the device completely, hold the power button until a prompt appears on the screen, and select Off.

The prompt appears after five seconds. If you release the power button before the prompt appears, the

device enters power saving mode.

Getting Started 3

Acquiring GPS Signals

When you turn on your navigation device, the GPS receiver must collect satellite data and establish the current

location. The time required to acquire satellite signals varies based on several factors, including how far you are

from the location where you last used your navigation device, whether you have a clear view of the sky, and how

long it has been since you last used your navigation device. The first time you turn on your navigation device, it

may take several minutes to acquire satellite signals.

1 Turn on the device.

2 Wait while the device locates satellites.

3 If necessary, go to an open area, away from tall buildings and trees.

in the status bar indicates the satellite signal strength. When at least half the bars are filled, the device is

ready for navigation.

Status Bar Icons

The status bar is located at the top of the main menu. The status bar icons display information about features

on the device. You can select some icons to change settings or view additional information.

GPS signal status. Hold to view GPS accuracy and acquired satellite information (Viewing GPS

Signal Status, page31).

Current time. Select to set the time (Setting the Time, page25).

Battery charge level.

Using the On-Screen Buttons

On-screen buttons allow you to navigate the pages, menus, and menu options on your device.

• Select to return to the previous menu screen.

• Hold to quickly return to the main menu.

• Select or to scroll through lists or menus.

• Hold or to scroll faster.

• Select to see a context-based menu of options for the current screen.

Adjusting the Volume

1 Select Volume.

2 Select an option:

• Use the slider bar to adjust the volume.

• Select to mute the device.

• Select a check box to enable or disable additional sound options.

Using the Audio Mixer

You can use the audio mixer to set the volume levels for different audio types, such as navigation prompts or

phone calls. The level for each audio type is a percentage of the master volume.

1 Select Volume.

2 Select Mixer.

3 Use the sliders to adjust the volume for each audio type.

4 Getting Started

Enabling or Disabling Sounds and Audio Sources

You can turn specific audio sources and system sounds on or off without affecting other audio sources.

1 Select Volume.

2 In the Sounds section, select an option:

• To enable the device to speak navigation prompts and directions, select the Spoken Navigation check

box.

• To enable the device to speak traffic alerts and prompts, select the Spoken Traffic Alerts check box.

• To enable the device to play a tone when a driver awareness alert is triggered, select the Alerts and Tones

check box.

• To enable the device to play a sound when you touch on-screen buttons, select the Button Presses check

box.

Adjusting the Screen Brightness

1 Select Settings > Display > Brightness.

2 Use the slider bar to adjust the brightness.

Driver Awareness Features and Alerts

CAUTION

The driver alerts and speed limit features are for information only and do not replace your responsibility to abide

by all posted speed limit signs and to use safe driving judgment at all times. Garmin

is not responsible for any

traffic fines or citations you receive for failing to follow all applicable traffic laws and signs.

Your device provides features that can help encourage safer driving and increase efficiency, even when you are

driving in a familiar area. The device plays an audible tone or message and displays information for each alert.

You can enable or disable the audible tone for some types of driver alerts. Not all alerts are available in all areas.

Schools: The device plays a tone and displays the speed limit (if available) for an upcoming school or school

zone.

Speed limit exceeded: The device displays a red border on the speed limit icon when you exceed the posted

speed limit for the current road.

Speed limit reduced: The device plays a tone and displays the upcoming speed limit so you can be prepared to

adjust your speed.

Wrong way on a one-way street: The device plays a message and displays a full-screen warning if you travel the

wrong way on a one-way street. The edges of the screen appear red and an alert remains at the top of the

screen until you leave the one-way street or correct your direction of travel.

Railroad crossing: The device displays the distance to an upcoming railroad crossing.

Animal crossing: The device plays a tone to indicate an upcoming animal crossing area.

Curves: The device plays a tone to indicate a bend in the road.

Slower traffic: The device plays a tone to indicate slower traffic when you approach slower traffic at a higher

speed. Your device must be receiving traffic information to use this feature (Traffic, page21).

Construction zone: The device plays a tone and displays a message when you approach a construction zone.

Lane closure: The device plays a tone and displays a message when you approach a lane closure.

Break planning: The device plays a tone and suggests upcoming rest stops after you have been driving for a

long time.

Enabling or Disabling Driver Alerts

You can enable or disable several types of driver alerts.

1 Select Settings > Driver Assistance > Driver Alerts.

2 Select or clear the check box next to each alert.

Driver Awareness Features and Alerts 5

Finding and Saving Locations

The maps loaded in your device contain locations, such as restaurants, hotels, auto services, and detailed street

information. The Where To? menu helps you find your destination by providing several methods to browse,

search, and save this information.

From the main menu, select Where To?.

• To quickly search all locations on your device, select Search (Finding a Location Using the Search Bar,

page6).

• To find an address, select Address (Finding an Address, page6).

• To browse or search pre-loaded points of interest by category, select Categories (Finding a Location by

Category, page8).

• To search near a different city or area, select next to the current search area (Changing the Search Area,

page8).

• To view and edit your saved locations, select Saved (Saving Locations, page12).

• To view locations you have recently selected from the search results, select Recent (Viewing Recently Found

Locations, page11).

• To browse and search Foursquare

points of interest, select Foursquare® (Searching Foursquare Points of

Interest, page9).

• To browse and search Tripadvisor

traveler ratings, select Tripadvisor (Tripadvisor, page9).

• To find national parks and explore park maps, select National Parks (Finding National Parks, page9).

• To navigate to specific geographic coordinates, select Coordinates (Finding a Location Using Coordinates,

page10).

Finding a Location Using the Search Bar

You can use the search bar to search for locations by entering a category, brand name, address, or city name.

1 Select Where To?.

2 Select Search in the search bar.

3 Enter all or part of the search term.

Suggested search terms appear below the search bar.

4 Select an option:

• To search for a type of business, enter a category name (for example, "movie theaters").

• To search for a business name, enter all or part of the name.

• To search for an address near you, enter the house number and street name.

• To search for an address in another city, enter the house number, street name, city, and state.

• To search for a city, enter the city and state.

• To search for coordinates, enter latitude and longitude coordinates.

5 Select an option:

• To search using a suggested search term, select the term.

• To search using the text you entered, select .

6 If necessary, select a location.

Finding an Address

NOTE: The order of the steps may change depending on the map data loaded on your device.

1 Select Where To?.

2 If necessary, select to search near a different city or area.

3 Select Address.

4 Follow the on-screen instructions to enter address information.

5 Select the address.

6 Finding and Saving Locations

Location Search Results

By default, the location search results appear in a list, with the nearest location at the top. You can scroll down

to view more results.

Select a location to view the option menu.

Select to view detailed information about the selected location.

Select to find parking areas near the location.

Select to view alternate routes to the locations.

Go!

Select to start navigating to the location using the recommended route.

Select to view the search results on the map.

Finding and Saving Locations 7

Changing the Search Area

By default, the device searches for locations near your current location. You can also search other areas, such

as near your destination, near another city, or along your active route.

1 Select Where To?.

2 Select next to the current search area .

3 Select a search area.

4 If necessary, follow the on-screen instructions to select a specific location.

The selected search area appears next to . When you search for a location using any of the options in the

Where To? menu, the device suggests locations near this area first.

Points of Interest

NOTICE

You are responsible for understanding and complying with any applicable rules, laws, or regulations associated

with points of interest.

A point of interest is a place that you may find useful or interesting. Points of interest are organized by category

and can include popular travel destinations such as gas stations, restaurants, hotels, and entertainment venues.

Finding a Location by Category

1 Select Where To?.

2 Select a category, or select Categories.

3 If necessary, select a subcategory.

4 Select a location.

Searching Within a Category

After you have performed a search for a point of interest, certain categories may display a Quick Search list that

shows the last four destinations you selected.

1 Select Where To? > Categories.

2 Select a category.

3 Select an option:

• Select a destination from the quick search list on the right side of the screen.

The quick search list provides a list of recently found locations in the selected category.

• Select a subcategory, if necessary, and select a destination.

8 Finding and Saving Locations

Finding National Parks

Device models that include maps for North America or the United States also include detailed information for

national parks in the United States. You can navigate to a national park or to a location within a national park.

NOTICE

You are responsible for understanding and complying with any applicable rules, laws, or regulations associated

with national parks.

1 Select Where To? > National Parks.

A list of national parks appears, with the nearest park at the top.

2 Select Search, and enter all or part of the park name to narrow the results (optional).

3 Select a national park.

A list of categories for locations of features and amenities within the park appears below the park name.

4 Select an option:

• To start navigating to the park, select Go!.

• To view more park information or explore the park features and amenities, select .

• To quickly find a location within the park, select a category from the list below the park name, and select a

location.

Foursquare

NOTICE

Garmin is not responsible for the accuracy or timeliness of information provided by Foursquare.

You are responsible for understanding and complying with any applicable rules, laws, or regulations associated

with points of interest.

Foursquare is a location-based social network. Your device includes millions of pre-loaded Foursquare points of

interest, which are indicated by the Foursquare logo in your location search results.

Searching Foursquare Points of Interest

You can search for Foursquare points of interest loaded on your device.

Select Where To? > Foursquare®.

Viewing Foursquare Location Details

You can view Foursquare location information and user ratings.

1 From the location search results, select a Foursquare point of interest.

2 Select .

Tripadvisor

NOTICE

Garmin is not responsible for the accuracy or timeliness of the Tripadvisor information.

You are responsible for understanding and complying with any applicable rules, laws, or regulations associated

with points of interest.

Your device includes Tripadvisor traveler ratings. Tripadvisor ratings appear automatically in the search results

list for restaurants, hotels, and attractions. You can also search for nearby Tripadvisor points of interest and

sort by distance or popularity.

Finding and Saving Locations 9

Finding Tripadvisor Points of Interest

1 Select Where To? > Tripadvisor.

2 Select a category.

3 If necessary, select a subcategory.

A list of nearby Tripadvisor points of interest for the category appears.

4 Select Sort Results to filter the displayed points of interest by distance or popularity (optional).

5 Select , and enter a search term (optional).

Navigating to Points of Interest Within a Venue

NOTE: This feature may not be available in all areas or for all product models.

You can create a route to a point of interest (POI) within a larger venue, such as a store in a shopping mall or a

specific terminal in an airport.

1 Select Where To? > Search.

2 Enter the name of the venue, and select .

3 Select the venue.

A list of categories for POIs within the venue appears.

4 Select a category, select a location, and select Go!.

The device creates a route to the parking area or venue entrance closest to the POI. When you arrive at the

destination, a checkered flag indicates the recommended parking area. A labeled point indicates the location of

the POI within the venue.

Search Tools

Search tools allow you to search for specific types of locations by responding to on-screen prompts.

Finding an Intersection

You can search for an intersection or junction between two streets, highways, or other roads.

1 Select Where To? > Intersections.

2 Follow the on-screen instructions to enter street information.

3 Select the intersection.

Finding a Location Using Coordinates

You can find a location using latitude and longitude coordinates.

1 Select Where To? > Coordinates.

2 If necessary, select , and change the coordinate format or datum.

3 Enter the latitude and longitude coordinates.

4 Select an option:

• To save the coordinates as a location, select Save.

• To start a route to the coordinates, select Go!.

Parking

Finding Parking Near Your Current Location

1 Select Where To? > Categories > Parking.

2 Select a parking location.

3 Select Go!.

10 Finding and Saving Locations

Finding Parking Near a Specified Location

1 Select Where To?.

2 Search for a location.

3 From the location search results, select a location.

4 Select .

A list of parking areas near the selected location appears.

5 Select a parking location.

6 Select Go!.

Viewing Recently Found Locations

Your device stores a history of the last 50 locations you have found.

Select Where To? > Recent.

Clearing the List of Recently Found Locations

Select Where To? > Recent > > Clear > Yes.

Viewing Current Location Information

You can use the Where Am I? page to view information about your current location. This feature is helpful if you

need to tell emergency personnel your location.

From the map, select the vehicle.

Finding Emergency Services and Fuel

You can use the Where Am I? page to find the nearest hospitals, police stations, and fuel stations.

1 From the map, select the vehicle.

2 Select Hospitals, Police Stations, or Fuel.

NOTE: Some service categories are not available in all areas.

A list of locations for the selected service appears, with the nearest locations at the top.

3 Select a location.

4 Select an option:

• To navigate to the location, select Go!.

• To view the phone number and other location details, select .

Getting Directions to Your Current Location

If you need to tell another person how to get to your current location, your device can give you a list of

directions.

1 From the map, select the vehicle.

2 Select > Directions to Me.

3 Select a starting location.

4 Select Select.

Adding a Shortcut

You can add shortcuts to the Where To? menu. A shortcut can point to a location, a category, or a search tool.

The Where To? menu can contain up to 36 shortcut icons.

1 Select Where To? > Add Shortcut.

2 Select an item.

Finding and Saving Locations 11

Removing a Shortcut

1 Select Where To? > > Remove Shortcut(s).

2 Select a shortcut to remove.

3 Select the shortcut again to confirm.

4 Select Done.

Saving Locations

Saving a Location

1 Search for a location (Finding a Location by Category, page8).

2 From the search results, select a location.

3 Select > Save.

4 If necessary, enter a name, and select Done.

5 Select Save.

Saving Your Current Location

1 From the map, select the vehicle icon.

2 Select Save.

3 Enter a name, and select Done.

Editing a Saved Location

1 Select Where To? > Saved.

2 If necessary, select a category.

3 Select a location.

4 Select .

5 Select > Edit.

6 Select an option:

• Select Name.

• Select Phone Number.

• Select Categories to assign categories to the saved location.

• Select Map Symbol to change the symbol used to mark the saved location on a map.

7 Edit the information.

8 Select Done.

Assigning Categories to a Saved Location

You can add custom categories to organize your saved locations.

NOTE: Categories appear in the saved locations menu after you have saved at least 12 locations.

1 Select Where To? > Saved.

2 Select a location.

3 Select .

4 Select > Edit > Categories.

5 Enter one or more category names, separated by commas.

6 If necessary, select a suggested category.

7 Select Done.

12 Finding and Saving Locations

Deleting a Saved Location

NOTE: Deleted locations cannot be recovered.

1 Select Where To? > Saved.

2 Select > Delete.

3 Select the box next to the saved locations to delete, and select Delete > Yes.

Following a oute

Routes

A route is a path from your current location to one or more destinations.

• The device calculates a recommended route to your destination based on the preferences you set, including

the route calculation mode (Changing the Route Calculation Mode, page16) and avoidances (Avoiding

Delays, Tolls, and Areas, page17).

• You can start navigating to your destination quickly using the recommended route, or you can select an

alternate route (Starting a Route, page13).

• If there are specific roads you need to use or avoid, you can customize the route.

• You can add multiple destinations to a route (Adding a Location to Your Route, page16).

Starting a Route

1 Select Where To?, and search for a location (Finding and Saving Locations, page6).

2 Select a location.

3 Select an option:

• To start navigating using the recommended route, select Go!.

• To choose an alternate route, select , and select a route.

Alternate routes appear to the right of the map.

The device calculates a route to the location and guides you using voice prompts and information on the map

(Your Route on the Map, page14). A preview of the major roads in your route appears at the edge of the map

for several seconds.

If you need to stop at additional destinations, you can add the locations to your route (Adding a Location to Your

Route, page16).

Starting a Route by Using the Map

You can start a route by selecting a location from the map.

1 Select View Map.

2 Drag and zoom the map to display the area to search.

3 Select an option:

• Select a location marker.

• Select a point, such as a street, intersection, or address location.

4 Select Go!.

Going Home

The first time you start a route home, the device prompts you to enter your home location.

1 Select Where To? > Go Home.

2 If necessary, enter your home location.

Editing Your Home Location

1 Select Where To? > > Set Home Location.

2 Enter your home location.

Following a Route 13

Your Route on the Map

As you travel, the device guides you to your destination using voice prompts and information on the map.

Instructions for your next turn or exit, or other actions appear across the top of the map.

Next action in the route. Indicates the next turn, exit, or other action and the lane in which you should

travel, if available.

Distance to the next action.

Name of the street or exit associated with the next action.

Route highlighted on the map.

Next action in the route. Arrows on the map indicate the location of upcoming actions.

Vehicle speed.

Name of the road on which you are traveling.

Estimated arrival time.

TIP: You can touch this field to change the information it shows (Changing the Map Data Field, page20).

Map tools. Provides tools to show you more information about your route and surroundings.

14 Following a Route

Viewing Turns and Directions

While navigating a route, you can view upcoming turns, lane changes, or other directions for your route.

1 From the map, select an option:

• To view upcoming turns and directions as you navigate, select > Turns.

The map tool displays the next several turns or directions beside the map. The list updates automatically

as you navigate the route.

• To view the complete list of turns and directions for the entire route, select the text bar at the top of the

map.

2 Select a turn or direction (optional).

Detailed information appears. An image of the junction may appear for junctions on major roadways, if

available.

Viewing the Entire Route on the Map

1 While navigating a route, select anywhere on the map.

2 Select .

Arriving at Your Destination

When you approach your destination, the device provides information to help you complete your route.

• indicates the location of your destination on the map, and a voice prompt announces you are approaching

your destination.

• When you stop at your destination, the device automatically ends the route. If the device does not detect your

arrival automatically, you can select > Stop to end your route.

Parking Near Your Destination

Your device can help you find a parking spot near your destination. When you approach some destinations, the

device automatically suggests parking areas.

1 Select an option:

• When the device suggests parking, select More to see all suggested parking areas.

NOTE: When you select a suggested parking area, the device automatically updates your route.

• If the device does not suggest parking locations, select Where To? > Categories > Parking, and select >

My Destination.

2 Select a parking location, and select Go!.

The device guides you to the parking area.

Following a Route 15

Changing Your Active Route

Adding a Location to Your Route

Before you can add a location to your route, you must be navigating a route (Starting a Route, page13).

You can add locations to the middle or end of your route. For example, you can add a fuel station as the next

destination in your route.

TIP: To create complex routes with multiple destinations or scheduled stops, you can use the route planner to

plan, schedule, and save a route (Planning a Route, page22).

1 From the map, select > Where To?.

2 Search for a location (Finding and Saving Locations, page6).

3 Select a location.

4 Select Go!.

5 Select an option:

• To add the location as the next destination in your route, select Add As Next Stop.

• To add the location to the end of your route, select Add As Last Stop.

• To add the location and edit the order of destinations in your route, select Add to Active Route.

The device re-calculates the route to include the added location and guides you to the destinations in order.

Shaping Your Route

Before you can shape your route, you must start a route (Starting a Route, page13).

You can manually shape your route to change its course. This allows you to direct the route to use a certain

road or go through a certain area without adding a destination to the route.

1 Touch anywhere on the map.

2 Select Shape Route.

TIP: You can select to zoom in on the map and select a more precise location.

The device enters route shaping mode and recalculates the route to travel through the selected location.

3 Select Go!.

4 If necessary, select an option:

• To add more shaping points to the route, select additional locations on the map.

• To remove a shaping point, select the shaping point and select Remove.

Taking a Detour

You can take a detour for a specified distance along your route or detour around specific roads. This is useful if

you encounter construction zones, closed roads, or poor road conditions.

1 From the map, select > Edit Route.

2 Select an option:

• To detour your route for a specific distance, select Detour by Distance.

• To detour around a specific road on the route, select Detour by Road.

Changing the Route Calculation Mode

1 Select Settings > Navigation > Calculation Mode.

2 Select an option:

• Select Faster Time to calculate routes that are faster to drive but can be longer in distance.

• Select Straight Line to calculate point-to-point routes (without roads).

Stopping the Route

From the map, select > Stop.

16 Following a Route

Avoiding Delays, Tolls, and Areas

Avoiding Traffic Delays on Your Route

Before you can avoid traffic delays, you must be receiving traffic information (Receiving Traffic Data Using a

Traffic Receiver, page21).

By default, the device optimizes your route to avoid traffic delays automatically. If you have disabled this option

in the traffic settings (Traffic Settings, page25), you can view and avoid traffic delays manually.

1 While navigating a route, select > Traffic.

2 Select Alternate Route, if available.

3 Select Go!.

Avoiding Toll Roads

Your device can avoid routing you through areas that require tolls, such as toll roads, toll bridges, or congestion

areas. The device may still include a toll area in your route if no other reasonable routes are available.

1 Select Settings > Navigation > Avoidances > Tolls and Fees.

2 Select Save.

Avoiding Road Features

1 Select Settings > Navigation > Avoidances.

2 Select the road features to avoid on your routes, and select Save.

Custom Avoidances

Custom avoidances allow you to select specific areas or sections of road to avoid. When the device calculates a

route, it avoids these areas and roads unless no other reasonable route is available.

Avoiding a Road

1 Select Settings > Navigation > Custom Avoidances.

2 If necessary, select Add Avoidance.

3 Select Add Avoid Road.

4 Select the starting point of the section of road to avoid, and select Next.

5 Select the ending point of the road section, and select Next.

6 Select Done.

Avoiding an Area

1 Select Settings > Navigation > Custom Avoidances.

2 If necessary, select Add Avoidance.

3 Select Add Avoid Area.

4 Select the upper-left corner of the area to avoid, and select Next.

5 Select the lower-right corner of the area to avoid, and select Next.

The selected area is shaded on the map.

6 Select Done.

Disabling a Custom Avoidance

You can disable a custom avoidance without deleting it.

1 Select Settings > Navigation > Custom Avoidances.

2 Select an avoidance.

3 Select > Disable.

Following a Route 17

Deleting Custom Avoidances

1 Select Settings > Navigation > Custom Avoidances > .

2 Select an option:

• To delete all custom avoidances, select Select All > Delete.

• To delete one custom avoidance, select the avoidance, and select Delete.

Using the Map

You can use the map to navigate a route (Your Route on the Map, page14) or to view a map of your

surroundings when no route is active.

1 Select View Map.

2 Touch anywhere on the map.

3 Select an option:

• Drag the map to pan left, right, up, or down.

• To zoom in or out, select or .

• To switch between North Up, 2D, and 3D views, select .

• To open the route planner, select (Route Planner, page22).

• To start a route, select a location on the map, and select Go! (Starting a Route by Using the Map, page13).

Map Tools

Map tools provide quick access to information and device functions while you view the map. When you activate

a map tool, it appears in a panel at the edge of the map.

Stop: Stops navigation of the active route.

Edit Route: Allows you to take a detour or skip locations in your route.

Mute Navigation: Mutes the device audio.

Cities Ahead: Shows upcoming cities and services along your active route or along a highway (Cities Ahead,

page19).

Up Ahead: Shows upcoming locations along the route or the road on which you are traveling (Up Ahead,

page18).

Traffic: Displays traffic conditions along your route or in your area (Viewing Upcoming Traffic, page20). This

feature is not available in all areas or for all device models.

Trip Data: Displays customizable trip data, such as speed or mileage (Viewing Trip Data from the Map,

page19).

Turns: Displays a list of upcoming turns in your route (Viewing Turns and Directions, page15).

Viewing a Map Tool

1 From the map, select .

2 Select a map tool.

The map tool appears in a panel at the edge of the map.

3 When you are done using the map tool, select .

Up Ahead

The Up Ahead tool provides information about upcoming locations along your route or the road on which you

are traveling. You can view upcoming points of interest by category, such as restaurants, fuel stations, or rest

areas.

You can customize the categories that show in the Up Ahead tool.

18 Using the Map

Viewing Upcoming Locations

1 From the map, select > Up Ahead.

While you are traveling, the map tool shows the next location along your road or route.

2 Select an option:

• If the map tool shows categories, select a category to view a list of nearby locations in that category.

• If the map tool shows upcoming locations, select a location to view location details or start a route to the

location.

Customizing the Up Ahead Categories

You can change the location categories that appear in the Up Ahead tool.

1 From the map, select > Up Ahead.

2 Select a category.

3 Select .

4 Select an option:

• To move a category up or down in the list, select and drag the arrow next to the category name.

• To change a category, select the category.

• To create a custom category, select a category, select Custom Search, and enter the name of a business

or category.

5 Select Save.

Cities Ahead

While you are traveling on a highway or navigating a route that includes a highway, the Cities Ahead tool

provides information about upcoming cities along the highway. For each city, the map tool shows the distance

to the highway exit and the services available, similar to the information on highway road signs.

Viewing Upcoming Cities and Exit Services

1 From the map, select > Cities Ahead.

While you are traveling along a highway or an active route, the map tool shows information about upcoming

cities and exits.

2 Select a city.

The device shows a list of points of interest located at the selected city exit, such as fuel stations, lodging, or

restaurants.

3 Select a location, and select Go! to start navigating.

Trip Information

Viewing Trip Data from the Map

From the map, select > Trip Data.

Customizing the Trip Data Fields

1 From the map, select > Trip Data.

2 Select a trip data field.

3 Select an option.

The new trip data field appears in the trip data map tool.

Viewing Trip Data

The trip data tool displays your speed and provides statistics about your trip.

From the map, select Speed.

Using the Map 19

Viewing Your Trip History

Your device keeps a record of the path you have traveled.

1 Select Settings > Map Display > Map Layers.

2 Select the Travel History check box.

Resetting Trip Information

1 From the map, select Speed.

2 Select > Reset Field(s).

3 Select an option:

• When not navigating a route, select Select All to reset every data field except the speedometer, on the first

page.

• Select Reset Overall Data to reset Trip A and total data.

• Select Reset Trip B to reset the odometer.

• Select Reset Max. Speed to reset the maximum speed.

Viewing Upcoming Traffic

NOTICE

Garmin is not responsible for the accuracy or timeliness of the traffic information.

Before you can use this feature, your device must be receiving traffic data (Traffic, page21).

You can view traffic incidents coming up along your route or along the road on which you are traveling.

1 While navigating a route, select > Traffic.

The nearest upcoming traffic incident appears in a panel on the right side of the map.

2 Select the traffic incident to view additional details.

Viewing Traffic on the Map

The traffic map shows color-coded traffic flow and delays on nearby roads.

1 From the main menu, select Apps > Traffic.

2 If necessary, select > Legend to view the legend for the traffic map.

Searching for Traffic Incidents

1 From the main menu, select Apps > Traffic.

2 Select > Incidents.

3 Select an item in the list.

4 If there is more than one incident, use the arrows to view additional incidents.

Customizing the Map

Customizing the Map Layers

You can customize which data appear on the map, such as topographic maps and BirdsEye imagery.

1 Select Settings > Map Display > Map Layers.

2 Select the check box next to each layer you want to show on the map.

Changing the Map Data Field

1 From the map, select a data field.

NOTE: You cannot customize Speed.

2 Select a type of data to display.

20 Using the Map

Changing the Map Perspective

1 Select Settings > Map Display > Driving Map View.

2 Select an option:

• Select Track Up to display the map in two dimensions (2-D), with your direction of travel at the top.

• Select North Up to display the map in 2-D with north at the top.

• Select 3-D to display the map in three dimensions.

Traffic

NOTICE

Garmin is not responsible for the accuracy or timeliness of the traffic information.

Your device can provide information about traffic on the road ahead or on your route. You can set your device to

avoid traffic when calculating routes, and to find a new route to your destination if a large traffic delay occurs on

your active route (Traffic Settings, page25). The traffic map allows you to browse the map for traffic delays in

your area.

To provide traffic information, your device must be receiving traffic data.

• All product models can receive traffic data using an over-the-air traffic receiver accessory. Go to your product

page at garmin.com to find and purchase a compatible traffic receiver accessory.

Traffic data is not available in all areas. For information about traffic coverage areas, go to garmin.com/traffic.

Receiving Traffic Data Using a Traffic Receiver

NOTICE

Heated (metallized) windshields could degrade the performance of the traffic receiver.

A traffic receiver receives traffic data from an over-the-air broadcast signal, where available. To receive over-

the-air traffic data, the device must be connected to vehicle power using a traffic-compatible power cable. A

traffic receiver is included with some product models (Traffic, page21). If your product model does not include

a traffic receiver, you can go to your product page at garmin.com to find and purchase a compatible traffic

receiver cable accessory.

Traffic data is not available in all areas. For information about traffic coverage areas, go to garmin.com/traffic.

Connect the device to vehicle power using the traffic compatible power cable (Mounting Considerations,

page1).

If your product model includes traffic data, the vehicle power cable included with your device is traffic

compatible. If you purchased a traffic receiver cable as an accessory, you should use the accessory cable to

connect the device to vehicle power.

When you are within a traffic coverage area, your device can display traffic information and help you avoid

traffic delays.

Enabling Traffic

Before you can enable traffic, you must connect your device to a compatible traffic receiver cable (Receiving

Traffic Data Using a Traffic Receiver, page21).

You can enable or disable traffic data.

1 Select Settings > Traffic.

2 Select the Traffic check box.

Viewing Traffic on the Map

The traffic map shows color-coded traffic flow and delays on nearby roads.

1 From the main menu, select Apps > Traffic.

2 If necessary, select > Legend to view the legend for the traffic map.

Traffic 21

Searching for Traffic Incidents

1 From the main menu, select Apps > Traffic.

2 Select > Incidents.

3 Select an item in the list.

4 If there is more than one incident, use the arrows to view additional incidents.

Using the Apps

Viewing the Owner's Manual on YourDevice

You can view the complete owner's manual on the device screen in many languages.

1 Select Apps > Owner's Manual.

The owner's manual appears in the same language as the software text (Language and Keyboard Settings,

page25).

2 Select to search the owner's manual (optional).

Route Planner

You can use the route planner to create and save a route, which you can navigate later. This can be useful for

planning a delivery route, a vacation, or a road trip. You can edit a saved route to further customize it, including

reordering locations, adding suggested attractions, and adding shaping points.

You can also use the route planner to edit and save your active route.

Planning a Route

A route can include many locations, and it must include at least a starting location and one destination. The

starting location is the location from which you plan to start your route. If you start navigating the route from

a different location, the device gives you the option to route to your starting location first. For a round trip, the

starting location and final destination can be the same.

1 Select Apps > Route Planner > Create Route.

2 If necessary, select a calculation mode.

NOTE: The Faster Time mode is selected by default.

3 Select an option to choose a location for your starting point:

• Select a location on the map.

• Select , and search for a location (Finding a Location Using the Search Bar, page6).

4 Repeat step 2 to add more locations.

NOTE: The last location you add is the destination.

5 After you have added all the necessary locations, select .

Editing and Reordering Locations in a Route

1 Select Apps > Route Planner.

2 Select a saved route.

3 Select List.

4 Select a location.

5 Select an option:

• To move the location up or down, select , and drag the location to a new position in the route.

• To add a new location after the selected location, select .

• To remove the location, select .

22 Using the Apps

Changing Routing Options for a Route

You can customize how the device calculates your route.

1 Select Apps > Route Planner.

2 Select a saved route.

3 Select .

4 Select an option:

• To add shaping points to your route, select Shaping, and select at least one location.

• To change the calculation mode for the route, touch a route segment, and select a calculation mode.

Navigating to a Saved Route

1 Select Apps > Route Planner.

2 Select a saved route.

3 Select Go!.

4 Select the first location to navigate to, and select OK.

5 Select Start.

The device calculates a route from your current location to the selected location, and then it guides you to

the remaining route destinations in order.

Editing and Saving Your Active Route

If a route is active, you can use the route planner to edit and save it.

1 Select Apps > Route Planner > My Active Route.

2 Edit your route using any of the route planner features.

The route recalculates each time you make a change.

3 Select Save to save your route, which you can navigate again later (optional).

Viewing Previous Routes and Destinations

Before you can use this feature, you must enable the travel history feature (Device and Privacy Settings,

page25).

You can view your previous routes and places you have stopped on the map.

Select Apps > Trip History.

Settings

Map and Vehicle Settings

Select Settings > Map Display.

Map Vehicle Icon: Sets the vehicle icon that represents your position on the map.

Driving Map View: Sets the perspective on the map.

Map Detail: Sets the level of detail on the map. More detail may cause the map to draw slower.

Map Theme: Changes the color of the map data.

Map Layers: Sets the data that appears on the map page (Customizing the Map Layers, page20).

myMaps: Sets which installed maps the device uses.

Enabling Maps

You can enable map products installed on your device.

TIP: To purchase additional map products, go to buy.garmin.com.

1 Select Settings > Map Display > myMaps.

2 Select a map.

Settings 23

Navigation Settings

Select Settings > Navigation.

Calculation Mode: Sets the route calculation method.

Avoidances: Sets road features to avoid on a route.

Custom Avoidances: Allows you to avoid specific roads or areas.

Restricted Mode: Disables all functions that require significant operator attention.

GPS Simulator: Stops the device from receiving a GPS signal, and saves battery power.

Calculation Mode Settings

Select Settings > Navigation > Calculation Mode.

The route calculation is based on road speeds and vehicle acceleration data for a given route.

Faster Time: Calculates routes that are faster to drive but can be longer in distance.

Straight Line: Calculates a direct line from your location to your destination.

Setting a Simulated Location

If you are indoors or not receiving satellite signals, you can use the GPS simulator to plan routes from a

simulated location.

1 Select Settings > Navigation > GPS Simulator.

2 From the main menu, select View Map.

3 Tap the map twice to select an area.

The address of the location appears at the bottom of the screen.

4 Select the location description.

5 Select Set Location.

Driver Assistance Settings

Select Settings > Driver Assistance.

Driver Alerts: Allows you to enable or disable alerts for upcoming zones or road conditions (Driver Awareness

Features and Alerts, page5).

Speeding Alert: Alerts you when you are exceeding the speed limit.

Reduced Speed Tone: Alerts you when the speed limit decreases.

Route Preview: Shows a preview of the major roads in your route when you start navigation.

Proximity Alerts: Alerts you when you approach speed cameras or red light cameras.

Proximity Alerts Settings

NOTE: You must have custom points of interest (POIs) loaded for proximity points alerts to display.

NOTE: This feature is not available in all areas.

Select Settings > Driver Assistance > Proximity Alerts.

Audio: Sets the style of alert that plays when you approach proximity points.

Alerts: Sets the type of proximity points for which alerts are played.

24 Settings

Display Settings

Select Settings > Display.

Color Mode: Allows you to select day or night color mode. If you select the Auto option, the device automatically

switches to day or night colors based on the time of day.

Brightness: Allows you to adjust the display brightness.

Display Timeout: Allows you to set the amount of idle time before your device enters sleep mode while using

battery power.

Screenshot: Allows you to take a picture of the device screen. Screenshots are saved in the Screenshot folder of

the device storage.

Traffic Settings

From the main menu, select Settings > Traffic.

Traffic: Enables the traffic feature.

Units and Time Settings

To open the Units and Time settings page, from the main menu, select Settings > Units & Time.

Current Time: Sets the device time.

Time Format: Allows you to select a 12-hour, 24-hour, or UTC display time.

Units: Sets the unit of measure used for distances.

Position Format: Sets the coordinate format and datum used for geographical coordinates.

Setting the Time

1 From the main menu, select the time.

2 Select an option:

• To set the time automatically using GPS information, select Automatic.

• To set the time manually, drag the numbers up or down.

Language and Keyboard Settings

To open the Language and Keyboard settings, from the main menu, select Settings > Language & Keyboard.

Voice Language: Sets the language for voice prompts.

Text Language: Sets all on-screen text to the selected language.

NOTE: Changing the text language does not change the language of user-entered data or map data, such as

street names.

Keyboard Language: Enables keyboard languages.

Device and Privacy Settings

Select Settings > Device.

About: Displays the software version number, the unit ID number, and information on several other software

features.

Regulatory: Displays regulatory markings and information.

EULAs: Displays the end-user license agreements.

NOTE: You need this information when you update the system software or purchase additional map data.

Software Licenses: Displays software licensing information.

Travel History: Allows the device to store a record of the places you go. This allows you to view the trip log, use

the Trip History feature, and use myTrends

™

suggested routes.

Reset: Allows you to clear your travel history, reset settings, or delete all user data.

Settings 25

Resetting Data and Settings

The device offers several options for deleting your user data and resetting all settings to the factory default

values.

1 Select Settings > Device > Reset.

2 Select an option:

• To clear your travel history, select Clear Travel History.

This option deletes all records of the places you have traveled. It does not delete saved locations or

installed maps.

• To reset all settings to the factory default values, select Reset Default Settings.

This option does not delete any user data.

• To delete all user data and reset all settings to the factory default values, select Delete Data and Reset

Settings.

This option deletes all user data, including your saved locations, recently found locations, and travel

history. Installed maps are not deleted.

Device Information

Viewing E-label Regulatory and Compliance Information

1 From the settings menu, swipe to the bottom of the menu.

2 Select Device > Regulatory.

Specifications

Operating temperature range From -20° to 55°C (from -4° to 131°F)

Charging temperature range From 0° to 45°C (from 32° to 113°F)

Wireless frequency and transmit

power

2.4GHz @ 18.4 dBm maximum

EU SAR 0.13 W/kg torso, 0.35 W/kg limb

Power input

Vehicle power using the included vehicle power cable. AC power using an

optional accessory (for home and office use only).

Battery type Rechargeable lithium-ion

Charging the Device

NOTE: This Class III product shall be powered by an LPS power supply.

You can charge the battery in the device using any of these methods.

• Connect the device to vehicle power.

• Connect the device to an optional power adapter accessory, such as a wall power adapter.

You can purchase an approved Garmin AC-DC adapter suitable for home or office use from a Garmin dealer

or www.garmin.com. The device may charge slowly when connected to a third-party adapter.

Device Maintenance

Garmin Support Center

Go to support.garmin.com for help and information, such as product manuals, frequently asked questions,

videos, and customer support.

26 Device Information

Map and Sofware Updates

For the best navigation experience, you should keep the maps and software on your device up to date.

Map updates provide the newest available changes to roads and locations in the maps used by your device.

Keeping maps up to date helps your device find recently added locations and calculate more accurate routes.

Map updates are large and may take several hours to complete.

Software updates provide changes and improvements to the device features and operation.

Updating Maps and Sofware with Garmin Express

™

You can use the Garmin Express application to download and install the latest map and software updates for

your device.

1 If you do not have the Garmin Express application installed on your computer, go to garmin.com/express and

follow the on-screen instructions to install it (Installing Garmin Express, page28).

2 Open the Garmin Express application.

3 Connect your device to your computer using a USBcable.

The small end of the cable connects to the USB port on your Garmin Drive device, and the large end

connects to an available USBport on your computer.

4 From your Garmin Drive device, select Tap to Connect to Computer.

5 When your Garmin Drive device prompts you to enter file transfer mode, select Continue.

6 In the Garmin Express application, click Add a Device.

The Garmin Express application searches for your device and displays the device name and serial number.

7 Click Add Device, and follow the on-screen instructions to add your device to the Garmin Express application.

When setup is complete, the Garmin Express application displays the updates available for your device.

Device Maintenance 27

8 Select an option:

• To install all available updates, click Install All.

• To install a specific update, click View Details, and click Install next to the update you want.

The Garmin Express application downloads and installs the updates onto your device. Map updates are very

large, and this process may take a long time on slower internet connections.

NOTE: If a map update is too large for the internal storage of the device, the software may prompt you to

install a microSD

card in your device to add storage space (Installing a Memory Card for Maps and Data,

page30).

9 Follow the on-screen instructions during the update process to finish installing updates.

For example, during the update process, the Garmin Express application may instruct you to disconnect and

reconnect your device.

Installing Garmin Express

The Garmin Express application is available for Windows

and Mac

computers.

1 On your computer, go to garmin.com/express.

2 Select an option:

• To view the system requirements and verify the Garmin Express application is compatible with your

computer, select System Requirements.

• To install on a Windows computer, select Download for Windows.

• To install on a Mac computer, select Download for Mac.

3 Open the downloaded file, and follow the on-screen instructions to complete the installation.

Device Care

NOTICE

Avoid dropping your device.

Do not store the device where prolonged exposure to extreme temperatures can occur, because it can cause

permanent damage.

Never use a hard or sharp object to operate the touchscreen, or damage may result.

Do not expose the device to water.

Cleaning the Outer Casing

NOTICE

Avoid chemical cleaners and solvents that can damage plastic components.

1 Clean the outer casing of the device (not the touchscreen) using a cloth dampened with a mild detergent

solution.

2 Wipe the device dry.

Cleaning the Touchscreen

1 Use a soft, clean, lint-free cloth.

2 If necessary, lightly dampen the cloth with water.

3 If using a dampened cloth, turn off the device and disconnect the device from power.

4 Gently wipe the screen with the cloth.

Avoiding Thef

• Remove the device and mount from sight when not in use.

• Remove the residue left on the windshield by the suction cup.

• Do not keep your unit in the glove compartment.

• Register your device using the Garmin Express software (garmin.com/express).

28 Device Maintenance

Restarting the Device

You can restart your device if it stops functioning.

Hold the power button for 12 seconds.

Removing the Device, Mount, and Suction Cup

Removing the Device from the Mount

1 Press the release tab or button on the mount.

2 Tilt the bottom of the device upward, and lift the device from the mount.

Removing the Mount from the Suction Cup

1 If necessary loosen the nut that secures the mount to the suction cup ball.

2 Turn the device mount to the right or left.

3 Apply pressure until the socket on the mount releases the ball on the suction cup.

Removing the Suction Cup from the Windshield

1 Flip the lever on the suction cup toward you.

2 Pull the tab on the suction cup toward you.

Troubleshooting

I cannot adjust the screen brightness on my device

If your Garmin Drive device is not supplied with enough power, the screen does not display at full brightness.

• Verify your vehicle is turned on and is supplying power to the power outlet.

• Verify the Garmin Drive device is connected to vehicle power using the included vehicle power cable and the

included vehicle power adapter (Mounting Considerations, page1).

The suction cup will not stay on my windshield

1 Clean the suction cup and windshield with rubbing alcohol.

2 Dry with a clean, dry cloth.

3 Mount the suction cup (Mounting Considerations, page1).

My device is not acquiring satellite signals

• Verify the GPS simulator is turned off (Navigation Settings, page24).

• Take your device out of parking garages and away from tall buildings and trees.

• Remain stationary for several minutes.

My battery does not stay charged for very long

• Decrease the screen brightness (Display Settings, page25).

• Shorten the display timeout (Display Settings, page25).

• Decrease the volume (Adjusting the Volume, page4).

• Put the device in power saving mode when not in use (Turning the Device On or Off, page3).

• Keep your device away from extreme temperatures.

• Do not leave your device in direct sunlight.

Troubleshooting 29

Appendix

Installing a Memory Card for Maps and Data

You can install a memory card to increase the storage space for maps and other data on your device. You can

purchase memory cards from an electronics supplier. The device supports microSD memory cards from 4 to

256GB. Memory cards must use the FAT32 file system format. Memory cards greater than 32GB must be

formatted using the device.

1 Locate the map and data memory card slot on your device (Garmin Drive 53 Device Overview, page1).

2 Insert a memory card into the slot.

3 Press it in until it clicks.

Data Management

The device has a memory card slot for additional data storage.

NOTE: The device is compatible with Windows 7 and newer, and Mac OS 10.7 and newer.

About Memory Cards

You can purchase memory cards from an electronics supplier, or purchase pre-loaded Garmin mapping

software (www.garmin.com). Memory cards can be used to store files such as maps and custom POIs.

Connecting the Device to Your Computer

You can connect the device to your computer using a USB cable.

1 Plug the small end of the USB cable into the port on the device.

2 Plug the larger end of the USB cable into a port on your computer.

3 From your Garmin Drive device, select Tap to Connect to Computer.

4 When your Garmin Drive device prompts you to enter file transfer mode, select Continue.

A picture of your device connected to a computer appears on the device screen.

Depending on your computer operating system, the device appears as either a portable device, a removable

drive, or a removable volume.

Transferring Data From Your Computer

1 Connect the device to your computer (Connecting the Device to Your Computer, page30).

Depending on your computer operating system, the device appears as either a portable device, a removable

drive, or a removable volume.

2 On your computer, open the file browser.

3 Select a file.

4 Select Edit > Copy.

5 Browse to a folder on the device.

NOTE: For a removable drive or volume, you should not place files in the Garmin folder.

6 Select Edit > Paste.

Disconnecting the USB Cable

If your device is connected to your computer as a removable drive or volume, you must safely disconnect your

device from your computer to avoid data loss. If your device is connected to your Windows computer as a

portable device, it is not necessary to safely disconnect the device.

1 Complete an action:

• For Windows computers, select the Safely Remove Hardware icon in the system tray, and select your

device.

• For Apple

computers, select the device, and select File > Eject.

2 Disconnect the cable from your computer.

30 Appendix

Viewing GPS Signal Status

Hold for three seconds.

Purchasing Additional Maps

1 Go to your device product page at garmin.com.

2 Click the Maps tab.

3 Follow the on-screen instructions.

Purchasing Accessories

• Optional accessories are available at garmin.com or from your Garmin dealer.

Appendix 31

support.garmin.com

GUID-B9B0B1F8-C5B4-463F-AAA8-F394D1492A06 v1April 2023