Clear Track ILU Fiber Pathway

Clear Track ILU Fiber Pathway | CRR-923-AEN | Page 1Corning Optical Communications

Clear Track ILU Fiber Pathway with 900 µm Clear Fiber

Features Benets

Virtually invisible pathway

Diuse-reection technolog provides homeowners and tenants with an

inconspicuous ber solution.

Proprietary, clear adhesive backing

Allows for simple installation without the use of staples, liquid adhesives,

or specialty tools.

Field-removable ber

900 µm ber can be removed easily to extend, or reroute per customer

needs without damaging wall surface.

Multisurface application

Secure installation to many surfaces including latex and oil paints and

wallpaper.

The Corning

Clear Track ILU Fiber Pathway provides an aesthetically pleasing solution for indoor residential or oce applications.

The pathway captures and routes a single 900 μm Clear Fiber or 900 μm 2-Fiber Micro Module to the desired outlet or terminal

location, while remaining virtually invisible. Clear Track ILU Fiber Pathway features a proprietary, clear adhesive backing material

with an easy-peel liner. Application involves no staples, heat, liquid adhesive, nor bulky raceways. To install, simply remove the

adhesive lining and apply the adhesive-backed surface to a wall near the ceiling or a baseboard.*

*The adhesive backing is meant to be for permanent bonding to the surface and therefore removing it from the wall will damage paint or wallpaper.

Clear Track ILU Fiber Pathway | CRR-923-AEN | Page 2Corning Optical Communications

The 900 µm ber can be easily laid and captured within the Clear Track Fiber Pathway with the Clear Track ber installation

tool. The exible, continuous Clear Track Pathway can be easily routed around corners as well as radiused or irregular surfaces,

without any accessories or corner pieces. The unique pathway ber restraints and conformable adhesive capture and provide

protection to the ber.

Clear Track ILU Fiber Pathway Specications

Material Adhesive-backed polymer resin

Color

900 µm Clear Fiber - clear

900 µm 2-Fiber Micro Module - white

Paintability

Paintable with either latex or oil-based paint. Painting Clear Track Pathway makes ber placement permanent

and not reroutable.

Certications

The Clear Track ILU Fiber Pathway product has been listed to the requirements of UL 2024: Cable Routing Assemblies

and Communications Raceways and CSA C22.2 No. 262 Optical Fiber and Communications Cable Raceway Systems - FT4.

Installation Conditions

Clear Track ILU Installation:

50°F to 104°F (10°C to 40°C) on a clean, dry surface. Suggested to maintain relative humidity below 85% to

prevent surface condensation.

Allow the Clear Track ILU Pathway duct and accessories to acclimate for 24 hours at recommended product

installation temperature prior to install.

Note: For optimum curing of the adhesive, hold recommended installation temperature conditions for 72 hours

after product installation.

Storage Conditions

The Clear Track ILU Pathway has a shelf life of 24 months from date of manufacture when stored at 23°F to 122°F

(-5°C to 50°C) and 0% to 95% relative humidity. The optimum product storage conditions are 72°F (22°C) and 50%

relative humidity.

Operating Temperature 23°F to 122°F (-5°C to 50°C)

UV Resistance Conforms to indoor requirements per ASTM G154, 1000h, UV-A 351 nm.

Clear Track ILU Fiber Pathway Wall Surface

Compatibility Test Results

Painted Smooth Surfaces

Flat Latex

Semi-Gloss Latex

Glossy Latex

Semi-Gloss Alkyd

Oil-Based Paint

Yes

Painted Textured Surfaces:

Light Stucco and Cement Block

Flat Latex

Semi-Gloss Latex

Glossy Latex

Semi-Gloss Alkyd

Oil-Based Paint

Yes

Wallpapered Surface

Plain Paper

Vinyl Coated

Vinyl

Yes

Wallpapered Surface

Polyolen Woven

Unnished and/or Unpainted Brick,

Concrete, or Block

Belt Clip Spool Holder with 900 µm Clear Fiber Spool Installed

900 μm Clear Fiber into ILU Fiber

Pathway with ILU Installation Tool

Clear Track Universal ILU

Installation Tool

Clear Track ILU Fiber Pathway | CRR-923-AEN | Page 3Corning Optical Communications

Fiber Specications

Product Type

Clear Fiber

2F Micro Module

Ultra bend-insensitive single-mode ber

Tight buer 900 µm clear PVC coating, proof tested

to 100 kpsi

Loose tube 900 µm white LSZH

™

jacket, two 250 µm

coated bers (blue, orange)

ITU-T G.657.B3, G.652.D

Optical Specications

Attenuation

Attenuation at 1310 nm

Attenuation at 1490 nm

Attenuation at 1550 nm

Attenuation at 1625 nm

≤ 0.35 dB/km

≤ 0.25 dB/km

≤ 0.22 dB/km

≤ 0.24 dB/km

Attenuation with Bending

Number of turns

Mandrel radius

Wavelength

Induced attenuation

5.0 mm

1550 nm

≤ 0.15 dB

5.0 mm

1625 nm

≤ 0.45 dB

Cuto Wavelength (ccf) ≤ 1260 nm

Mode Field Diameter (MFD)

Wavelength (nm)

MFD (µm)

1310 nm

8.7 ± 0.5

1550 nm

9.65 ± 0.7

Geometrical Specications

Glass cladding diameter

Glass core/cladding concentricity error

Glass core/cladding non-circularity

Clear Fiber buer diameter

2F Micro Module diameter

Coating diameter

125.0 ± 0.4 µm

≤ 0.3 µm

≤ 0.3%

0.9 ± 0.05 mm

0.9 ± 0.1 mm

242 ± 5 µm

Clear Track Hallway/ILU/Quad

Wall Compatibility Test Weight

and Test Strips

Micro Point-of-Entry Wall Cover

900 μm 2-Fiber Micro Module

900 µm Clear Fiber, 1 km Spool

ITU-T G.657.B3 Grade

Ordering Information

Description Part Number Minimum Order

Clear Track ILU Fiber Pathway (track only) 205 ft spool 80611621311 One piece

900 µm Clear Fiber, 1 km spool 80611498058 One piece

900 µm Clear Fiber, 600 ft spool 80611622038 One piece

2F, Micro Module, 900 µm, 600 ft spool CLR-HALLM-600-2F One piece

2F, Micro Module, 900 µm, 1 km spool CLR-HALLM-1KM-2F One piece

Clear Track ILU Cover, 1 m length, 305 pieces (1,000 ft) 80611487796 One pack

Belt Clip Spool Holder (3-in ID, 2-in W) 80611621337 One piece

Micro Point-of-Entry Wall Cover 80611498074 60 pieces

Universal Clear Track ILU Installation Tool CLR-ILU-TOOL-UNIV Six pieces

Clear Track Installation Tool with ILU/quad wheels 80611486459 Six pieces

Clear Track Hall/ILU/Quad Wall Compatibility Test Weight and Test Strips 80611623671 One piece

Clear Track Wall Surface Compatibility Test Strips (rell, 40 strips) 80611486871 One pack

Clear Track Wall Cleaning Kit XT005573271 One pack

Corning Optical Communications LLC • 4200 Corning Place • Charlotte, NC 28216 USA

800-743-2675 • FAX: 828-325-5060 • International: +1-828-901-5000 • www.corning.com/opcomm

Corning Optical Communications reserves the right to improve, enhance, and modify the features and specications of Corning Optical

Communications products without prior notication. A complete listing of the trademarks of Corning Optical Communications is available at

www.corning.com/opcomm/trademarks. All other trademarks are the properties of their respective owners. Corning Optical Communications