Connecting Data and Power Suppy
1) Run/secure the ethernet cable from the location where the computer will be to the ceiling
location where the Falcon will be mounted. Connect one end of the cable to the ethernet port
on the Falcon (see figures) and the other end to your network router or computer.
2) Run the power cord from a power source to the overhead location where the Falcon will
be mounted. Plug one end of the power cord into the back of the Falcon (see figures) and the
other end into a GFCI-protected outlet or GFCI-protected power strip.
*GFCI-protected outlets are identifiable by the test and reset buttons. If you have additional
questions please contact an electrician.
FALCON QUICK START GUIDE
05