Instruction Manual
WASHLET
SW3084T40
SW3084
■
Thank you for your recent purchase of this product.
Please read the enclosed information to ensure the safe use of your product.
■
Be sure to read this Instruction Manual before using your product and keep it in a safe place
for future reference.
2020.10.1
D07869
TOTO U.S.A., Inc. 1155 Southern Road Morrow, GA 30260
Phone : (770) 282-8686
You are advised to record the following information to allow quick service.
Date of purchase : Name of shop :
Tel : ( )
Date : year month day
Warranty Registration and Inquiry
For product warranty registration, TOTO U.S.A. Inc. recommends On-Line Warranty Registration. Please visit
our web site http://www.totousa.com. If you have questions regarding warranty policy or coverage, please
contact TOTO U.S.A. Inc.,
Customer Service Department, 1155 Southern Road, Morrow, GA 30260 (888) 295 - 8134 or (678) 466 - 1300
when calling from outside of U.S.A.
What functions are available on your product?
Safety Precautions
................
4
Operational Precautions
.....
11
Parts Names
........................
12
Preparation
..........................
14
What to Do?
.........................
38
If the water does not fl ow due to
a water service interruption
......
38
If you cannot operate with
the remote control
................
38
Freeze Damage Prevention
..
39
Long Periods of Disuse
.......
40
Removal of Operation Guide
...
41
Troubleshooting
...................
42
Specifi cations
......................
46
Limited Warranty
.................
47
Table of Contents
Maintenance
........................
31
Power Plug
..........................
31
Main Unit
.............................
32
Gap between the Main Unit
and the Toilet Lid
................
33
Gap between the Main Unit
and Bowl Unit
......................
34
Deodorizing Filter
................
36
Wand
...................................
36
Wand cleaning
Water Filter Drain Valve
......
37
Basic Operations
.................
16
Mechanism of Auto Functions
...
16
Deodorizer,
Auto wand CLEAN, Pre-mist
Using the Remote Control
...
18
Temperature Adjustment
(Toilet Seat, Warm Water,
Drying)
..................................
20
Energy Saver Features
......
22
Various Operations
.............
26
Setting List
..........................
26
Auto functions
.....................
28
Other settings
......................
30
WASHLET
Ref. Page
SW3084T40
SW3084
Basic
Functions
Cleansing
Rear cleansing
●
18
Rear soft cleansing
Front cleansing
Changing the cleansing
method
Wand position
adjustment
●
Water pressure
adjustment
Oscillating cleansing
Pulsating cleansing
Personal setting lock
Drying
Warm air drying
●
Changing
the temperature
Temperature
adjustment
●
20, 21
Sanitary
Functions
Removing odors
Deodorizer
●
16
"EWATER+" cleaning
Auto wand CLEAN
●
Bowl pre-cleaning
Pre-mist
●
Convenience
Functions
Heating the toilet seat
Heated seat
●
-
Saving energy
Auto energy saver
●
22, 23
Timer energy saver
Maintenance
Main Unit One-touch
removal
●
34, 35
Removable toilet lid 33
Wand cleaning 36
Part No.
Functions
Product name (Model)
As you sit
As you stand up
Removing odors inside
the bowl unit.
Deodorizer Auto power deodorizer
A mist is automatically sprayed
inside the bowl unit to make it
more diffi cult for dirt to adhere.
Pre-mist
Cleans the wand with
"EWATER+"
Auto wand CLEAN
Lights to show that the
"CLEAN" functions are
operating.
Keep It
Clean
Sanitary Toilet
The self-cleaning functions
operate automatically.
(See page 16 for details.)
Part No.
2 3
ReferenceMaintenanceOperation
Introduction
IMPORTANT SAFEGUARDS
READ ALL INSTRUCTIONS BEFORE USING
Symbols and Meanings
WARNING
May result in death or serious injury.
CAUTION
May result in injury or property damage.
The following symbols are used to indicate important safety instructions for the use of the product.
Symbol Meaning
This symbol indicates a prohibited use of the product.
This symbol is used to indicate a required step in the use of this product.
WARNING
Do not plug or unplug the power plug with wet hands.
Doing so may cause electrical shock.
Do not get any water or cleaning solution on the main unit or power plug.
Doing so may cause fi re, electrical shock, heat or short circuit.
Doing so may cause the product to crack resulting in injury or water damage.
Never disassemble, repair or alter.
Doing so may cause fi re, electrical shock, overheating, short circuit or breakdown.
Do not install the product on moving vehicles such as wheeled vehicles or boats.
Doing so may cause fi re, electric shock, short circuit or malfunction.
The toilet seat, toilet lid, main unit, or other parts may come loose and fall off , resulting in injury.
Do not use the product if a malfunction occurs.
In case of breakdown or other problem, be sure to cut off power by means such as unplugging
the power plug.
Close the water shutoff valve to stop water supply.
Possible malfunctions:
Water is leaking from a pipe or the main unit.
The product is cracked or broken.
The product makes a strange noise or emits a strange odor.
The product emits smoke.
The product is abnormally hot.
The toilet seat cushion is out of place.
Continued use after malfunction could cause a fi re, electric shock, heat, short circuit, injury or
water damage.
Safety Precautions
WARNING
Do not use other water then allowed by the laws and ordinances of the
region of use. Only Use drinking water.
Do not use seawater or recycled water.
Doing so may cause irritation to the skin and malfunction.
Do not touch the power plug during thunderstorms.
Doing so may cause electrical shock.
Do not allow the water supply hose to touch the power plug or outlet.
Doing so may cause condensation resulting in a fi re, electrical shock, heat or a short.
Do not do anything that may damage the power cord, power plug.
Do not strike, yank, twist, excessively bend, damage, alter, or heat the power cords.
Also, do not place anything heavy on, bind or pinch the power cords.
Using a damaged power cord may result in a fi re, electrical shock, heat or short.
Do not use a loose or faulty electrical outlet.
Doing so may cause fi re or short circuit.
Do no use any outlet or wiring equipment beyond its specifi ed rating.
Plugging too many plugs into the same outlet, for example using outlet splitters, can cause fi re
due to heat.
Do not use any power supply other than the one specifi ed.
AC 120 V, 60 Hz
Doing so may cause fi re or excessive heat.
Do not stick a fi nger or anything else into the warm air outlet.
Do not place anything on the warm air outlet or drape clothes over it.
Doing so may cause burns, electrical shock or malfunction.
Keep cigarettes and other open fl ames away from the product.
Failure to do so may cause fi re.
Refrain from sitting on the seat for long periods.
It may cause low-temperature burns.
To prevent the following persons from getting a moderate temperature burn during use, other
person should turn off the toilet seat heater.
Young children, the aged and other users unable to set the temperature appropriately
themselves.
The ill, physically disabled and others who do not have freedom of movement.
Those using any medicines that cause drowsiness (sleeping or cold medicine), those who have
been drinking heavily, anyone severely fatigued and anyone else liable to fall asleep.
4 5
Introduction
WARNING
This is an electrical product. Do not install it anywhere water is likely to get on
the product or anywhere with humidity high enough that water is likely to form
on the surface of this product. When using the product in a bathroom, install a
fan or ventilation port and ensure good air fl ow through the bathroom.
Failure to do so may cause fi re or electrical shock.
Always connect the product to the cold water supply.
Connecting to hot water supply may result in burns and equipment damage.
Make sure that a properly grounded (3 prong) outlet has been installed.
Failure to install a grounded outlet could cause electrical shock in the event of a malfunction or
short circuit.
Insert the power plug securely into the outlet.
Failure to do so may cause fire, heat or short circuit.
To unplug, hold the power plug, not the power cord.
Do not unplug by pulling the power cord.
Pulling on the power cord may cause damage and result in fi re or heat.
If the power cord is damaged, avoid danger by having the manufacturer's
repair department or equivalent specialist replace it.
Always unplug the power plug from the outlet before maintenance or
inspection.
Failure to do so may cause electrical shock or malfunction.
Periodically remove dust and dirt from the power plug and make sure it is
securely plugged into the wall outlet.
Failure to do so may cause fire, heat or short circuit.
Pull the power plug out from the outlet and wipe clean with a dry cloth.
Always unplug the power plug from the outlet before removing the main unit.
Failure to do so may cause fi re or electrical shock.
When leaking battery fl uid adheres to your body or clothes, wash it away
with clean water.
The fl uid may damage your eyes or skin.
Preliminary studies in females suggest that overuse of continuous spraying
can increase the possibility of vaginal mucosa drying and potential reduction in
desirable microbial organisms.
Although these studies have not been validated, please consult your healthcare
provider for concerns regarding whether these circumstances may apply to you.
More importantly, if you are an individual suff ering from any immune
defi ciency as a result of disease, chemotherapy, or other medical condition
compromising the immune system you should consult your healthcare
provider before use of this product.
Safety Precautions (Continued)
CAUTION
Do not use the product if the main unit is unstable.
Doing so may cause the main unit to come loose and fall, resulting in injury.
If the product is damaged, do not touch the damaged section.
Doing so may cause electrical shock or injury.
Replace it immediately.
Do not apply strong force, mechanical shock, step on or stand on the toilet
seat, toilet lid or main unit. Also do not place any heavy object on the toilet
seat, toilet lid or main unit.
Doing so may cause cracking or cause the main unit to come loose and fall, resulting in injury.
Doing so may damage the product and cause injury or water damage.
Do not lift up this product by the toilet seat or lid.
Do not raise the toilet seat or lid while objects are resting on top of the unit.
Doing so may cause the main unit to come loose and fall, resulting in injury.
When maintaining the plastic parts (main unit etc.) or the water supply hose,
use a neutral kitchen detergent diluted with water. Do not use any of the
following.
Toilet cleaner, household cleaner, benzene, paint thinner, powdered cleanser or nylon
scrubbing brush.
These items may damage or crack the plastic and cause injury or malfunction.
These items could damage the water supply hose and cause a water leak.
To prevent a sudden water leak, do not remove the water fi lter drain valve
when the shutoff valve is open.
Doing so will cause water to spurt out.
(Refer to Page 37 for instructions on cleaning the water fi lter drain valve.)
Do not fold or crush the water supply hose; do not damage by cutting with a
sharp object.
Doing so may cause water leaks.
Do not install the base plate, which is not attached.
Doing so may cause damage.
6 7
Introduction
Safety Precautions (Continued)
CAUTION
If a water leak should occur, always close the shutoff valve.
When the ambient temperature is likely to drop to 32 °F (0 °C) or lower,
prevent damage to the pipes and hoses due to freezing.
Frozen water pipes could cause the main unit and the pipes to break, resulting in a water leak.
Regulate the room temperature to prevent the pipes and hoses from freezing during cold months.
Drain the water.
When not using the product over an extended period of time, drain the
water out of the main unit and the water supply hose after closing the water
shutoff valve, and pull the power plug from the outlet.
When using the product again, allow the product to refi ll with water fi rst. Otherwise, the water in
the tank might become contaminated and cause skin infl ammation or other problems.
(Refer to Page 40 for instructions on replenishing the water.)
Leaving the power on may cause fi re or heat.
When installing the water fi lter drain valve, make sure that it is securely
tightened in its proper position.
Failure to securely tighten it may cause a water leak.
Push the main unit securely on to the base plate.
After pushing the main unit until a click sound is heard, pull it slightly toward you to make sure
that the product does not detach.
Doing so may cause the main unit to come loose and fall, resulting in injury.
Make sure of the plus and minus signs on the batteries before inserting them.
Remove depleted batteries immediately.
When replacing the batteries:
Replace both batteries with new ones.
Use the same brand for both new batteries (any brand available).
Failure to do so may cause the batteries to leak fl uid, generate heat, rupture, or ignite.
When the product is supposed not to be used for long time, remove the
batteries from the remote control.
Failure to do so may cause the batteries to leak fl uid.
DANGER
To reduce the risk of electrocution:
1. Do not use while bathing.
2. Do not place or store the product where it can fall or be pulled into a tub or sink.
3. Do not place in or drop into water or other liquid.
4. Do not reach for the product when it has fallen into water. Unplug it immediately.
WARNING
To reduce the risk of burns, electrocution, fi re or injury to persons:
1. Close supervision is necessary when this product is used by, on, or near children or
invalids.
2. Use this product only for its intended use as described in this manual. Do not use
attachments not recommended by the manufacturer.
3. Never operate this product if it has a damaged cord or plug, is not working properly, has
been dropped or damaged, or has been dropped in water. Return the product to a service
center for examination and repair.
4. Keep the cord away from heated surfaces.
5. Never block the air openings on the product or place it on a soft surface, such as a bed
or couch, where the air openings may be blocked. Keep the air openings free of lint, hair,
and other similar items.
6. Never use while sleepy or drowsy.
7. Never drop or insert any object into any opening or hose.
8. Do not use outdoors. Do not operate where aerosol (spray) products are being used or
where oxygen is being administered.
9. Connect this product to a properly grounded outlet only.
See "Grounding Instructions" in Page 10.
10. The tank should be fi lled with water only.
Servicing should be performed by an authorized service representative.
This product is for household use.
8 9
Introduction
■
For prevention of damage
●
Wipe plastic areas such as the main unit and remote
control with a soft cloth tightly wrung out with water.
Dry cloth or tissue
●
Do not lean against the toilet lid.
■
For prevention of malfunctions and failures
●
Disconnect the power plug if there is a risk of
lightning.
●
A toilet seat cover or a toilet
lid cover cannot be used.
(The seat switch may
not function properly.
Additionally, the toilet seat
and lid may not open or
close properly.)
●
Do not urinate on the main unit, toilet seat or wand.
(Doing so may cause a failure or discoloration.)
●
Do not apply strong forces to the control panel of
the remote control.
●
When using a toilet cleaner to clean the toilet, rinse
it off within 3 minutes and leave the toilet seat and
toilet lid open.
(If vapor from a toilet cleaner enters the main unit,
it may cause a malfunction.)
Wipe off any cleaner that remains on the bowl unit.
●
Do not use the product with the toilet lid removed.
●
Do not expose to direct sunlight.
(Doing so may cause changes in color, irregular
heated seat temperature, remote control
malfunction or the product malfunction due to the
change in temperature.)
●
Use radios, etc. away from the product.
(The product could cause interference with the
radio signal.)
●
If you use a booster seat for infants or a soft
highchair, remove it after use.
(Keeping it installed may prevent some of the
functions from being used.)
●
Do not apply force to the remote control.
(May cause malfunction.)
To prevent the remote control from being
dropped, set it in the hanger when you are not
using it. Be careful not to expose it to water.
●
Do not place anything on the toilet seat and lid,
and do not press them with hands.
(Failure to do so may turn on the seat switch,
causing the fl oor to get wet if buttons on the
remote control are touched and warm water
comes out from the wand.)
■
For prevention of malfunctions
●
Do not block the remote control transmitter or
receiver.
<About the seat switch>
●
When you sit on the toilet seat, the seat switch
turns ON, enabling you to use various features.
(A click sound is heard when the seat switch is
ACTIVATED.)
Seat switch (Built-in)
The toilet seat lowers.
Switch
ON
Gap
●
Sit back on the toilet seat.
The seat switch will not turn on unless you
sit on the seat properly.
Note
When a child uses the product, the seat
switch may not be ACTIVATED by their
light body weight.
Since the toilet seat is designed to move
up and down, a clearance is provided
between the toilet seat cushion and the
bowl unit.
Covers
Grounding Instructions
This product should be grounded. In the event of an electrical short circuit, grounding
reduces the risk of electric shock by providing an escape wire for the electrical current.
This product is equipped with a cord having a grounding wire with a grounding plug.
The plug must be plugged into an outlet that is properly installed and grounded.
DANGER - Improper use of the grounding plug can result in a risk of electric shock.
If repair or replacement of the cord or plug is necessary, do not connect the grounding wire
to either fl at-head terminal.
Check with a qualifi ed electrician or serviceman if the grounding wire instructions are not
completely understood, or if in doubt as to whether the product is properly grounded.
SAVE THESE INSTRUCTIONS
Safety Precautions (Continued) Operational Precautions
10 11
Introduction
Part no., etc.
Toilet lid cushions
Shutoff valve
*1
(Page 15)
Toilet lid
Water supply hose
Wand cover
Warm air outlet cover
Wand
Seat switch
(Built-in)
Heated seat
Power cord
Power Plug
Left side of the main unit
Right side of the main unit
Main display
<All the LEDs light up in the fi gure>
Remote control
receiver
Toilet seat
cushions
Deodorizing fi lter
(Page 36)
Main unit removal button
(Pages 34, 35)
Cover Water drain plug
(Page 40)
Water fi lter drain valve (Page 37)
Power LED
Seat LED
Water LED
Wand CLEAN LED
Energy saver LED
Deodorizer outlet
Descriptions in this manual are based on the illustrations of SW3084
*1 The shape and location vary depending on the type of toilet bowl and tank.
Parts Names
For
SW3084T40
12 13
Introduction
2. Turn on the power
3. Open the shutoff valve
Preparation
Using the Product for the First Time
1
Fully open the shutoff valve.
Shutoff
valve
1
Insert the power plug.
The wand extends and then retracts.
2
Check that the "Power" LED
lights up.
<Power>
<If the light is off >
Switch "Power" to "ON" using the remote control.
To operate from the back of remote control
Press "Power ON/OFF" button about 3 seconds
or longer.
To operate from the front of remote control
Recommended if the remote control is secured to
prevent theft, etc.
Press "Oscillating cleansing" button about
10 seconds or longer.
1. Insert the battery
1
Remove the remote control
from the hanger.
Remote control
Hanger
2
Open the battery cover and
insert two AA batteries.
Battery cover
Close
Open
When batteries are properly loaded, all
the LEDs on the remote controll light up
for about 2 sec.
3
Mount the remote control in the
hanger.
■
About the batteries
Use dry cell, alkaline batteries.
Be sure to follow "Safety Precautions" to
prevent the batteries from rupturing or leaking
fl uid. (Pages 6, 8)
If the remote control is secured
(for anti theft)
1
Remove the screw from the
remote control fi xture.
Remove
Remote control
Hanger
Screw
Wall
Phillips screwdriver
(View from side)
2
Remove the remote control
from the hanger.
■
To secure the remote control again
Tighten and fi x the screw.
(Overtightening may cause damage to parts
such as the hanger.)
14 15
Introduction
Basic Operation
Mechanism of Auto Functions
As you approach
As you sit As you stand up
*1
Deodorizer
Auto wand CLEAN
Pre-mist
"EWATER+" is used automatically to clean the wand.
●
Deodorizing fi lter needs regular
maintenance.
(Page 36)
Only when the cleansing functions are used.
Starts the auto
power deodorizer
It stops after about 60 seconds.
After about 10 seconds
After about 25 seconds
The wand extends to clean
with the "EWATER+" that
comes out of the base
*2
0
(sec) 10 25
Starts
the deodorizer
Pre-mist
Removing odors inside the bowl unit.
A mist is automatically sprayed inside the
bowl unit to make it more difficult for dirt to
adhere.
*1 To keep clean the wand every time it is used, water remaining in the wand is drained after you stand up from the toilet seat.
*2 When the cleansing functions (Rear cleansing and Front cleansing etc,) have not been used in 8 hours, the wand is cleaned
automatically. (Water comes out from around the wand.)
The left are default setting functions.
●
These may be changed. → "Various Operations" (Pages 26-30)
Auto wand CLEAN
Flashes
During "Auto wand CLEAN"
or "Wand CLEAN"
What is meant by "EWATER+" ?
"EWATER+" helps the self-cleaning wand feature working eff ectively and preventing the dirt accumulation
causing the stains.
• "EWATER+" is generated from Potable water.
• "EWATER+" helps to minimize dirty surfaces, but does not make cleaning unnecessary.
• The eff ect and duration vary depending on the usage environment and conditions.
"EWATER+" can also be used by pressing the remote control button.
■
Wand
Press "Wand CLEAN" button
(After wand cleaning, water comes out from around the wand.)
●
To clean the wand with it extended. "Wand cleaning" (Page 36)
16 17
Operation
Basic Operation
Using the Remote Control
*1
Stopping
Drying
Cleansing
"Front cleansing"
Serves as a bidet for ladies.
"Rear soft cleansing"
Cleanses your rear with
mild water pressure.
"Stopping"
Stops the operation.
"Warm air drying"
Dries your rear.
"Rear cleansing"
Cleanses your rear.
The setting changes between
and
each time the is pressed.
"Timer energy
saver"
Low battery warning
mark
(Page 38)
"Auto energy
saver"
Adjust temperatures (Page 20) Saving energy (Page 24, 25)
"Setting
confi rmation"
The current setting can be
discerned from the LEDs.
"Wand cleaning"
To clean the wand with it extended.
(Page 36)
"Power ON/OFF"
Pressing it about 3 seconds or longer
turns the power on/off .
•
If the remote control is secured to
prevent theft (Page 15 2-
2)
Temperatures Energy saver
"Toilet seat
temperature"
"Warm water
temperature"
"Drying air
temperature"
For your information
●Water may sometimes come out from around the wand when it expands in the warm water tank, but this is
normal.
●As the warm water tank of hot-water system is used, the temperature of warm water may become lower if it is
continuously consumed.
Operate the controls on the remote control; a beep sounds when the main unit
receives the signal.
●
Functions that operate when a
button is pressed during "Rear
cleansing", "Rear soft cleansing"
or "Front cleansing" cleansing.
"Personal setting lock"
You can store your preferred "Wand position", "Water
pressure" and "Warm water temperature" settings.
●
To store a settings
While cleansing is in progress, set your preferred "Wand position",
"Water pressure" and "Warm water temperature" and then press
and hold
or for 2 seconds or longer.
●
To use
Press or , and then press the button for the cleansing you want to use.
The "Wand position" and "Water pressure" lamps will light up for about 10
seconds in their set positions, and the "Water temperature" display switches.
The setting changes between "ON" and
"OFF" each time the button is pressed.
You can adjust the water pressure
to one of fi ve levels.
([-] Softer, [+] Stronger)
After you press the "Water pressure
adjustment" button, the set position
will light for 10 seconds."
You can adjust the washing position to
5 diff erent points between the front and
the rear, using the [▲] and [▼] buttons.
After you press the "Wand position
adjustment" button, the set position
will light for 10 seconds."
It will return to the 3rd position for
a while (not exceeding a maximum
of 5 minutes) once operation of
the remote control has fi nished.
It will return to the 3rd position for
a while (not exceeding a maximum
of 5 minutes) once operation of
the remote control has fi nished.
"Oscillating cleansing"
The wand moves back and forth
to cleanse your rear thoroughly.
"Water pressure adjustment"
"Wand position adjustment"
Note
Sitting back on the toilet seat
makes it easier to adjust the wand
position and to reduce splashing.
*1 Remote control transmitter (Front side, Top side)
"Pulsating cleansing"
Cleanses with the water pressure
pulsating between soft and strong.
Remote control back side
This section is an overview of the settings that can be confi gured with the remote control.
See the corresponding pages for the detailed descriptions.
Cleans the wand with "EWATER+".
The wand can be automatically
cleaned when you use the
cleansing functions (Rear cleansing,
Front cleansing, etc.). (Page 16)
"Wand CLEAN"
18 19
Operation
Temperature Adjustment
Toilet Seat, Warm Water, Drying
Three diff erent temperature levels (High, Medium, Low) and "OFF" setting can be made.
When the toilet seat does not get warm, or when the warm water is not warm enough, even after
temperature adjustment.
Is the "Energy saver" set to "ON"? (Page 22, 23)
Adjusting the temperature
1
Remove the remote control from the hanger.
•
If the remote control is secured to prevent theft (Page 14)
2
Choose and press the button of the temperature that you want to set
from the
("Toilet seat temperature"button), ("Warm water
temperature" button) and
("Drying air temperature" button).
•
The current temperature level appears.
3
Press the button selected in step
2
repeatedly until a desired
temperature level lights up.
The setting changes each time the button is pressed once
"High"
Lit
"Medium"
Lit
"Low"
Lit
"OFF"
OFF
•
The "Drying" cannot be turned "OFF".
If the button is not pressed for about 10 seconds, the "Temperature adjustment" LED will go off , but the setting will be retained.
If the "Temperature adjustment" LED goes out before the setting is completed, start all over again at step 2.
<Settings complete>
4
Mount the remote control in the hanger.
•
If the remote control is secured to prevent theft (Page 14)
Displaying the
temperature level of
the pressed button
Warm water
temperature button
(When you want
to adjust the warm
water temperature)
Drying air
temperature button
(When you want to
adjust the drying air
temperature)
Toilet seat
temperature
button (When you
want to adjust
the toilet seat
temperature)
<Seat>
Lit
<Water>
When the seat
temperature and the warm
water temperature are set
<Seat>
OFF
<Water>
When the seat
temperature and the warm
water temperature are
turned "OFF"
To turn the warm water temperature and toilet seat temperature "OFF"
The "Drying" cannot be turned "OFF".
1
Remove the remote control from the hanger.
•
If the remote control is secured to prevent theft (Page 14)
2
Select a temperature button you want to turn "OFF" from ("Toilet seat
temperature" button),
("Warm water temperature" button) and press it.
•
The current temperature level appears.
3
Press the button selected in step
2
repeatedly until the temperature level
is set to "OFF".
The setting changes each time the button is pressed once
"OFF"
OFF
(All LED's)
"High"
Lit
"Medium"
Lit
"Low"
Lit
<Settings complete>
4
Mount the remote control in the hanger.
•
If the remote control is secured to prevent theft (Page 14)
20 21
Operation
Energy Saver Features
Type
"Auto energy saver" or "Timer energy saver" can be selected.
To save energy, lower (or turn "OFF") the seat or warm water temperature.
You want the product to save
energy automatically.
You want to save energy only
for the preset duration of time.
(6 hours, 9 hours)
You want to save energy
any way possible
Auto energy saver Timer energy saver
Timer energy saver
+
Auto energy saver
The product detects time periods with
infrequent use and lowers the toilet seat
temperature automatically.
●
It takes about 10 days for the product
to determine the periods when it is
used relatively less frequently.
Once the time is set, the toilet seat
heater and warm water heater will be
turned off automatically every day at
that same time.
When both "Timer energy saver" and "Auto
energy saver" are set, "Auto energy saver"
operates when "Timer energy saver" is not
operating.
When energy
saver is in
operation
■
Main display
Lit LitOFF
Lit
(Orange)
OFFOFF
Lit
(Green)
●
During "Auto energy saver":
Same LED indication as "Auto energy saver"
●
During "Timer energy saver":
Same LED indication as "Timer energy saver"
■
Toilet seat heater
■
Warm water heater
Low temperature
Set
*1
temperature
OFF
OFF
Low temperature
Set
*1
temperature
OFF
OFF
Example
Set temperature
*1
Low temperature
*2
OFF
*3
When used infrequently from 9 pm to 6 am
6 am0 am 9 pm
When set from 8 am to 5 pm
8 am0 am 5 pm
When "Timer energy saver" and "Auto energy saver"
are used together
6 am
8 am
0 am 9 pm
5 pm
*1 The toilet seat temperature set on pages 20, 21.
*2 The time period when the toilet seat heater is set to a "Low".
The warm water heater is "Set temperature".
*3 The time period when the toilet seat heater and warm water
heater are "OFF".
●
Even if the energy saver is being activated (with the
toilet seat heater set to "Low" or "OFF," or with the
warm water heater set to "OFF"), the toilet seat will be
temporarily heated when you sit on it. (To reach the setting
temperature, the toilet seat takes about 15 minutes and the
warm water about 10 minutes, respectively.)
(The LED indication on the main display returns to the
state for when the energy saver is on.)
Lit (Green)
OFF
<Power> <Seat> <Energy
saver>
<
Water
>
<Power> <Seat> <Energy
saver>
<
Water
>
Energy saver is on
Energy saver is off
To set energy saver
Page 24 and 25
22 23
Operation
Energy Saver Features
How to Set
Timer energy
saver button
Auto energy saver
button
Remote control back side
When energy saver is set,
the "Energy saver" LED
(green) lights up.
<Energy saver >
Auto energy saver Timer energy saver
Press "Auto energy saver"
button.
1
●
Set the Energy saver at the time you want to start it.
Example: To save energy from 1 am to 7 am (for 6
hours)
<Settings complete>
• Press the "Timer energy saver" button
repeatedly until the "6" LED lights up.
When 1:00 AM comes,
1
For setting to "Auto energy saver"
Lit (Green)
For setting to "OFF"
OFF
The setting changes each time
the button is pressed once
Press "Timer energy saver"
button.
<Settings complete>
For 6 hours
Lit
For 9 hours
Lit
When "OFF"
OFF
The setting changes each time
the button is pressed once
24 25
Operation
Various Operations
Setting List
Buttons used for setting
Setting Types
Available Settings
Bold: Initial settings
Settings
How to Set
Ref. Page
Auto
functions
Cleaning
Features
Auto wand CLEAN
ON / OFF
• Set whether or not to
clean the wand automatically
Page 28
Pre-mist
ON / OFF
• Set whether or not to
spray mist in the bowl unit automatically
Deodorizer
ON / OFF
• Set whether or not to
deodorize automatically after sitting on the toilet seat
Page 29
Auto power deodorizer
ON / OFF
• Set whether or not to
power deodorize automatically after standing up
Other
settings
Beep sound
ON / OFF
• Set whether or not to
make a beep sound
Page 30
Personal setting lock
ON / OFF
• Set whether or not to
use the personal setting lock
Check fi rst!
LED indication during setting
Stopping button
Toilet seat temperature button
Wand cleaning button
Rear cleansing button
Timer energy saver
Auto energy saver button
Personal setting lock 2 button
Setting confi rmation button
Remote control back side Remote control back side
*1 During setting, if the next button is not pressed within about 60 seconds, the light will stop flashing.
If you fail to complete the setting, redo from the step 1.
[Checking settings via LED]
"Wand position adjustment" LED
All remote control LEDs flash
*
1
When the "Stopping" button is
pressed for at least 10 seconds
26 27
Operation
Various Operations
Auto functions
Cleaning Features
Set whether or not to clean the wand
automatically
Auto wand CLEAN
*1
Set whether or not to spray mist in the bowl
unit automatically
Pre-mist
Cleaning Features
Set whether or not to deodorize automatically
after sitting on the toilet seat
Deodorizer
Set whether or not to power deodorize
automatically after standing up
Auto power deodorizer
*1 When "Auto wand clean" is set to "OFF", the "Wand CLEAN" LED turns off .
2
and
Press "Timer energy saver" button
and "Setting confi rmation" button
at the same time.
The setting changes each time
the button is pressed once
Set whether or not to clean the wand
automatically
For setting to "ON"
One short beep.
For setting to "OFF"
*1
One long beep.
2
Press "Wand cleaning" button
about 5 seconds or longer.
The setting changes each time
the button is held down
longer than 5 seconds.
Set whether or not to deodorize automatically
after sitting on the toilet seat
For setting to "ON"
One short beep.
For setting to "OFF"
One long beep.
2
and
Press "Auto energy saver" button
and "Setting confi rmation" button
at the same time.
The setting changes each time
the button is pressed once
Set whether or not to spray mist in the bowl
unit automatically
For setting to "ON"
One short beep.
For setting to
"do not spray"
One long beep.
2
Press "Toilet seat temperature"
button.
The setting changes each time
the button is pressed once
Set whether or not to power deodorize
automatically after standing up
For setting to "ON"
One short beep.
For setting to "OFF"
One long beep.
1
Press "Stopping" button until all LEDs
on the remote control start fl ashing.
(about 10 seconds)
1
Press "Stopping" button until all LEDs
on the remote control start fl ashing.
(about 10 seconds)
3
Press "Stopping" button.
<Settings complete>
3
Press "Stopping" button.
<Settings complete>
28 29
Operation
Power Plug
(Approximately once a month)
Dry cloth Wet cloth
1
Unplug the power plug and
wipe it with a dry cloth.
2
Insert the power plug.
The "Power" LED lights up.
WARNING
●
Periodically remove dust from
the blades and other parts of the
power plug.
•
Unplug the power plug and wipe it
with a dry cloth.
●
Fully insert the power plug.
●
When unplug the power plug, hold
the main body of the power plug.
•
Pulling the power cord may
damage the power plug or power
cord.
Maintenance
Power Plug
Various Operations
Other settings
Other settings
Set whether or not to make a beep sound
Beep sound
*1
Set whether or not to use the personal setting
lock
Personal setting lock
*1 When you change each of the settings, set the electronic sound to "Make a beep sound".
3
Press "Stopping" button.
<Settings complete>
1
Press "Stopping" button until all LEDs
on the remote control start fl ashing.
(about 10 seconds)
2
Press "Rear cleansing" button.
The setting changes each time
the button is pressed once
Set whether or not to make a beep sound
For making a beep sound
One short beep.
For not making a beep sound
One long beep.
2
Press "Personal setting lock 2"
button for 5 seconds or longer.
The setting changes each time
the button is held down
longer than 5 seconds.
Set whether or not to use the personal
setting lock
•
Check by "Wand position adjustment" LED (Page 27)
For setting to "ON"
For setting to "OFF"
The "Power"
LED goes off .
Main Unit
Do not use a dry cloth
or toilet paper on plastic
parts.
(May cause damage.)
For safety, unplug the power
plug before maintenance.
*1
WARNING
Always unplug the power plug from
the outlet before maintenance or
inspection.
(Failure to do so may cause electric shock
or malfunction, resulting in a breakdown.)
OFFLit
*1 Except when using "Wand cleaning".
31
Maintenance
30
Maintenance
Main Unit
Main Unit
(Approximately daily)
Attention!
●
This product is an electric appliance. Be careful not to let water seep inside or leave detergent in the gap
between the main unit and bowl unit. (May damage plastic parts or cause a malfunction.)
●
When using a toilet cleaner to clean the toilet, rinse it off within 3 minutes and leave the toilet seat and toilet
lid open.
Wipe off any cleaner that remains on the bowl unit.
(If vapor from a toilet cleaner enters the main unit, it may cause a malfunction.)
●
Do not push or pull the covers around the wand with undue force.
(May cause damage or malfunction.)
●
Wipe the back surface of the toilet seat and the toilet seat cushions with a soft cloth tightly wrung out with
water.
(Otherwise adhesion of dirt may result in discoloration.)
Soft cloth
soaked in water
Toilet paper
Dry cloth
Nylon scrubbing brush
(May cause damage)
1
Unplug the power plug.
2
Wipe with a soft cloth that has been soaked in water and wrung out
thoroughly.
■
For heavy dirt
• Wipe with a soft cloth soaked in diluted, neutral kitchen detergent, and then wipe with a soft cloth
soaked in water.
Neutral kitchen detergent
Paint thinner
Benzene
Powdered cleanser
3
Insert the power plug.
• The "Power" LED lights up.
Gap between the Main Unit and the Toilet Lid
Gap between the Main Unit and the Toilet Lid
(Approximately once a month)
Soft cloth soaked
in water
Toilet paper, etc.
(May cause damage.)
6
Open and close the toilet lid
to check the reinstallation.
3
Wipe with a soft cloth that
has been soaked in water
and wrung out thoroughly.
1
Unplug the power plug.
The toilet lid can be removed for
thorough cleaning.
4
Reinstall the toilet lid.
: Join the pin and the hinge on the
right side.
↓
Slightly tilt the toilet lid to the front.
↓
: While pulling out the left side,
↓
: Mount by joining the hinge with the
recess.
* Be careful not to pinch your fi ngers.
5
Insert the power plug.
• The "Power" LED lights up.
2
Remove the toilet lid.
Slightly tilt the toilet lid to the front.
↓
: Pull the left side outward.
↓
: Disconnect the hinge from the recess
and pull up.
↓
: Disconnect the right side.
Hold with
both hands
Removing and Reinstalling
Pin
Hinge
Hinge
Recess
32 33
Maintenance
Maintenance
Gap between the Main Unit and Bowl Unit
Gap between the Main Unit and Bowl Unit
(Approximately once a month)
Gap between the Main Unit and Bowl Unit
Toilet paper, etc.
(May cause damage.)
Soft cloth soaked
in water
[SW3084T40]
Gap between the Main Unit and Bowl Unit
(Approximately once a month)
You can remove the main unit to clean the top
of the bowl unit and the bottom of the main unit.
Soft cloth soaked
in water
Toilet paper, etc.
(May cause damage.)
1
Unplug the power plug.
If the power is not unplugged,
the product may malfunction or
cause a failure or electric shock.
2
Remove the main unit.
• Do not pull the unit with undue force. (because the water supply hose and power cord are attached.)
(1) Pull the main unit toward you while pressing
the "Main unit removal button".
Main unit
removal button
Top of the bowl unitWater supply hose
Power cord
Base plate
Bolt
(2) Lift up the main unit.
• Do not excessively bend the water supply hose.
3
Clean the top of the bowl unit and the bottom of the main unit.
• Wipe with a soft cloth soaked in a diluted, neutral kitchen detergent. Then, wipe it with a soft cloth
soaked in water so that no detergent remains.
4
Mount the main unit.
(1)
Lift the main unit, then lower it straight down while threading the power
cord and water supply hose into the recess on the bowl unit.
• Be careful not to pinch the power cord.
• Do not excessively bend the water supply hose
(2) Align the main unit with the center of the base plate and press it
fi rmly onto the base plate until a click sound is heard.
Click
Base plate
After mounting, check that the main unit does not
detach even when pulled.
CAUTION
Push the main unit fi rmly on to the base plate until a
click sound is heard.
(Doing so may cause the main unit to come loose and fall,
resulting in injury.)
5
Insert the power plug.
• The "Power" LED lights up.
1
3
Clean the top of the bowl unit and the bottom of the main unit.
• Wipe with a soft cloth soaked in a diluted, neutral kitchen detergent. Then, wipe it with a soft
cloth soaked in water so that no detergent remains.
If the power is not unplugged,
the product may malfunction or
cause a failure or electric shock.
You can remove the main unit to clean the top
of the bowl unit and the bottom of the main unit.
2
Remove the main unit.
• Do not pull the unit with undue force.
(because the water supply hose and
power cord are attached.)
5
Insert the power plug.
• The "Power" LED lights up.
4
Align the main unit with the center of the
base plate and press it fi rmly onto the base
plate until a click sound is heard.
Click
Push the main unit fi rmly on to the
base plate until a click sound is heard.
(Doing so may cause the main unit to come
loose and fall, resulting in injury.)
After mounting, check that the main
unit does not detach even when pulled.
Mount the main unit.
Unplug the power plug.
[SW3084]
CAUTION
Water supply hose
Power cord
Pull the main unit toward you while
pressing the "Main unit removal button".
Main unit
removal button
Base plate
Bolt
Top of the bowl unit
34 35
Maintenance
Maintenance
Deodorizing Filter
Wand
Wand
(Approximately once a month)
<If you notice dirt (Wand cleaning)>
Press "Wand cleaning" button.
Water Filter Drain Valve
Soft cloth Toilet paper, etc.
(May cause damage.)
Deodorizing Filter
Wand
Water Filter Drain Valve
3
1
2
Extend the wand.
To operate from the back of remote control
To operate from the front of remote control
•
Recommended if the remote control is secured
to prevent theft.
(1) Press "Stopping" button until all LEDs
on the remote control start fl ashing. (about
10 seconds)
(2)
Press "Front cleansing" button about
3 seconds or longer.
• The wand extends and water fl ows out for
cleaning.
• The wand automatically retracts after about
5 minutes.
Press "Stopping" button on the
front side of the remote control.
• The wand retracts.
Wipe with a soft, wet cloth.
• Do not pull, push or press the wand with
excessive force.
(May cause damage or malfunction.)
Deodorizing Filter
(Approximately once a month)
Water Filter Drain Valve
(Approximately once every 6 months)
<If you think the water pressure has weakened>
2
Remove the deodorizing
fi lter.
• Hold the knob and pull outward.
• Do not pull with undue force.
(May cause damage or malfunction.)
Clean with a tool such as a
toothbrush.
• When washing with water, dry off all
water before mounting.
3
Toothbrush, etc.
4
Mount the deodorizing
fi lter.
1
Unplug the power plug.
5
Insert the power plug.
• The "Power" LED lights up.
Push fi rmly until a
click sound is heard.
Deodorizing Filter
Knob
CAUTION
Do not remove the water fi lter drain valve while
the shutoff valve is open.
(Otherwise, water may leak out)
3
Unplug the power plug.
8
Open the shutoff valve.
(Page 15)
5
Clean with a tool such as a toothbrush.
• Also, remove any dust from inside the hole of the
water fi lter drain valve.
1
Close the shutoff valve.
• The water supply stops.
7
Insert the power plug.
• The "Power" LED lights up.
6
Reinstall the water fi lter drain valve
and cover.
• Insert the water fi lter drain valve and use a fl at-head
screwdriver to tighten it securely.
4
Remove the cover and water fi lter
drain valve.
• Loosen the water fi lter drain valve with a fl at-head
screwdriver and then pull it.
Shutoff
valve
Flat-head screwdriver
Cover
Water fi lter drain
valve
2
(1)
Press "Wand cleaning" button.
(2)
Press "Stopping" button on the front side of the remote control.
•
The wand retracts.
Extend the wand.
(Release the pressure from the water supply pipe.)
To operate from the back of remote control
To operate from the front of remote control
•
Recommended if the remote control is secured to prevent theft.
(1)
Press "Stopping" button until all LEDs on the remote
control start fl ashing. (about 10 seconds)
(2)
Press "Front cleansing" button about 3 seconds or longer.
(3)
Press "Stopping" button on the front side of the remote control.
•
The wand retracts.
36 37
Maintenance
If the water does not fl ow due to a water service interruption
■
Replacing the batteries
1
Unplug the power plug.
<Power>
2
Remove the remote control from the
hanger.
(Page 14)
3
Open the battery cover and replace two
AA batteries.
(Page 14)
•
The low battery warning mark goes off .
4
Mount the remote control in the hanger.
5
Insert the power plug.
•
The "Power" LED lights up.
If you cannot operate with the remote control
Attention!
•
"ON" and "OFF" settings of the functions such as the energy saver function may be canceled when the batteries
are replaced. Set them again.
■
If the low battery warning mark "
" on the back
of the remote control is fl ashing, please replace the
batteries.
It is the time to replace
the batteries.
Freeze Damage Prevention
Water supply hose
Horizontally
1
Use a bucket to fl ush water.
2
If the water level is low after
fl ushing, add more water.
• Prevents odors.
• When the water supply is restored, be sure to perform
a fl ush.
(To prevent waste from remaining in the drain pipe.)
Attention!
Newspaper,
dust cloth, etc.
Large bucket
Pour strongly,
aiming at the center
of the bowl unit.
When the ambient temperature is likely to drop to 32 °F (0 °C) or lower, take measures to prevent freezing.
• When the ambient temperature is likely to drop to 32 °F (0 °C) or lower, do not use the energy saver feature.
(May damage the product.)
• Warm the bathroom or take measures against freezing so that the ambient temperature does not drop below 32 °F (0 °C).
Attention!
How to freeze damage prevention
1
Close the shutoff valve.
(Page 36)
• The water supply stops.
Do not remove the water fi lter drain valve
while the shutoff valve is open.
(Otherwise, water may leak out)
CAUTION
■
To use the product again
• The water needs to be resupplied. (Page 40)
7
(2) [Applicable to SW3084 only]
• Drain the water from the water supply hose.
• Insert the water fi lter drain valve and use a
fl at-head screwdriver to tighten it securely.
(3) When water draining is completed, reinstall
the water fi lter drain valve and cover.
6
Insert the power plug.
• The "Power" LED lights up.
Set the water and toilet seat
temperature to "High".
(Page 20)
• To maintain the temperature, close the toilet seat
and toilet lid after fi nishing work.
2
Drain the water from the toilet
tank.
• Manipulate the lever/button/etc. until the
water stops.
4
Unplug the power plug.
5
Drain the pipe.
(1)
Remove the cover and water fi lter drain valve.
• Loosen the water fi lter drain valve with a
fl at-head screwdriver and then pull it.
Flat-head screwdriver
Cover
Water fi lter drain
valve
3
What to Do?
If the water does not fl ow due to a water service interruption
If you cannot operate with the remote control
(1) Press "Wand cleaning" button.
(2)
Press "Stopping" button on the front
side of the remote control.
•
The wand retracts.
Extend the wand.
(Release the pressure from the water supply pipe.)
To operate from the back of remote control
To operate from the front of remote control
•
Recommended if the remote control is secured to
prevent theft.
(1) Press "Stopping" button until all LEDs
on the remote control start fl ashing. (about
10 seconds)
(2)
Press "Front cleansing" button about 3
seconds or longer.
(3)
Press "Stopping" button on the front
side of the remote control.
•
The wand retracts.
38 39
Reference
What to Do?
Long Periods of Disuse
If the toilet is in a location you will not visit for a long time, drain the water.
(Failure to do so may cause breakdown or skin irritation due to polluted product tank water.)
Resupplying the Water
How to drain the water
1
■
If water may get frozen
• Add antifreeze solution in the water in the bowl to prevent freezing.
(The antifreeze solution should not be fl ushed out. Collect it before using the toilet and dispose of it.)
■
To use the product again
• The water needs to be resupplied. (See below)
2
If the power is not on,
Insert the power plug.
• The "Power" LED lights up.
3
Discharge water from the wand.
(1) Pressing down the left side of the toilet seat,
(2)
Press "Rear cleansing" button on the remote control to discharge
water from the wand for about 2 minutes.
• It takes about 1 minute maximum before water comes out.
• Catch the water in a paper cup or other receptacle.
(3)
Press the "Stopping" button on the remote control.
1
Open the shutoff valve.
• Check that water is not leaking from a pipe or the main unit.
4
Drain the pipe. (Page 39 Step
5
)
*After draining the water, Keep the cover
removed.
■
If the remaining water has frozen and no water comes out
•
Heat the inside of the bathroom, and warm the water supply hose and shutoff valve using a cloth soaked in warm water.
Tighten the water drain plug
securely with a fl at-head screwdriver
and reinstall the cover.
6
Drain the water from the toilet tank.
(Page 39 Step
1
2
)
Unplug the power plug.
3
Soft cloth soaked in water
(to prevent scratching)
Paper cup
Water drain plug
Flat-head
screwdriver
Removal of Operation Guide
How to remove the operation guide
Follow the procedure below.
1
Unplug the power plug.
2
Remove the remote control from the hanger.
(Page 14)
3
Remove the hanger and
operation guide.
Hanger Operation guide
Phillips screwdriver
Screw
4
Screw the hanger on the wall.
5
Mount the remote control in the hanger.
6
Insert the power plug.
•
The "Power" LED lights up.
■
To install back the operation guide, follow the procedure above.
(Install the operation guide at step
4
.)
Loosen the water drain plug until water
comes out from around the wand.
• Water comes out from around the wand.
(It takes about 3 minutes to complete draining.)
* The water drain plug cannot be removed.
5
2
Extend the wand.
(Release the pressure from the water supply pipe.)
(Page 39 Step
3
)
40 41
Reference
CAUTION
Troubleshooting
Shutoff valve
■
While the LED is lit, energy saver
(Pages 22, 23)
is in
operation, so the toilet seat temperature may be
reduced or the warm water heater and toilet seat
heater may be turned off .
■
Is the " " LED on the back
of the remote controller fl ashing?
➝
Replace the batteries. (Pages 14, 41)
■
Is the remote control transmitter
or the remote control receiver
blocked?
➝
Remove obstructions, dirt, water
droplets or any other blockages.
Please check fi rst
Is the Power LED lit?
Is the Energy saver
LED lit?
Is the remote control
working?
First, try the actions described on pages 42 - 45.
If the problem persists, consult the installer, seller, or
TOTO customer service.
(see contact information on the back cover.)
If a water leak occurs, close
the shutoff valve.
■
Is the breaker on the distribution board turned on?
→ Check whether there is a power outage or the breaker has turned
"OFF".
■
Is the "Power ON/OFF" setting "OFF"?
→ Switch it to "ON" with the remote control. (Page 15 Step
2
-
2
)
■
Is the "Power" LED on the
main display fl ashing?
→ The main unit is not mounted
properly. Mount them correctly
again. (Pages 34, 35)
<Power>
The remote
control uses
batteries
to operate.
Remote control receiver
Remote control
transmitter
Rear cleansing, Rear soft cleansing, Front cleansing and Wand
Trouble Please check
Ref.
Page
The wand
(or cleansing water)
does not come out
●
Did you sit on the toilet continuously for 2 hours or longer? (If so, operation is
stopped for safety purposes.)
➞
Stand up from the seat and then use again.
-
●
The seat switch will not turn on unless you sit on the seat properly.
➞
Sit back on the toilet seat.
11
●
Are you using a toilet seat cover, a toilet lid cover or
a seat for infants?
➞
Remove any covers.
When using a seat for infants or a soft highchair,
remove after each use.
Covers
11
●
Are you pressing "Wand CLEAN" button?
• When you press "Wand CLEAN" button, "EWATER+" comes out from the
vicinity of the wand to clean the wand.
➞
To clean the wand with it extended, perform "Wand cleaning".
36
The wand extends but
the cleansing water
does not come out /
The cleansing water
pressure is weak
●
Has a water failure occurred?
➞
Press "Stopping" button on the remote control and wait until water service
is restored.
-
●
Is the shutoff valve closed?
➞
Fully open the shutoff valve.
15
●
Is the water fi lter drain valve clogged with foreign matter?
➞
Clean the filter.
37
●
Is the water pressure set to a low level?
18
●
Is the water drain plug loosened?
➞
Tighten the water drain plug securely.
40
The cleansing water
is cold
●
Is the warm water temperature set to "OFF" or a low level?
●
When the temperature of the water supply or the bathroom is low, the water
temperature may be low when fi rst sprayed.
●
Is the timer energy saver in operation?
• The energy saver feature is on when the "Energy saver" LED is on and the
"Power" LED is off on the main display.
When you sit on the seat, the warm water heater is temporarily turned on
and water is warmed in about 10 minutes.
➞
When the timer energy saver is set to "ON", you can also turn it "OFF".
20
-
22, 23
25
Stops in the middle
of use
●
"Rear cleansing", "Rear soft cleansing" and "Front cleansing" stop
automatically after 5 minutes of continuous use.
●
Does the seat switch have diffi culty detecting?
➞
Sit back on the toilet seat. If you get up slightly from the seat, or sit forward on
the seat, the seating switch may temporarily stop detecting your presence.
-
11
Water comes out
unexpectedly from
the wand
●
Water may sometimes come out from around the wand when it expands in
the warm water tank.
●
Is the "Wand CLEAN" LED on the main display fl ashing?
➞
"Auto Wand CLEAN" starts and the wand is cleaned.
-
16
42 43
Reference
Troubleshooting
Warm air drying
Trouble Please check
Ref.
Page
The dryer
temperature is low
●
Is the dryer temperature set to low level?
20
Stops in the middle
of use
●
The feature stops automatically after about 10 minutes of continuous use.
●
Does the seat switch have diffi culty detecting?
➞
Sit back on the toilet seat. If you get up slightly from the seat, or sit forward on
the seat, the seating switch may temporarily stop detecting your presence.
-
11
Toilet Seat and Toilet Lid
Trouble Please check
Ref.
Page
The toilet seat is
cold
●
Is the toilet seat temperature set to "OFF" or a low level?
20
●
Is energy saver in operation?
• The energy saver feature is on when the "Energy saver" LED is on and the
"Power" LED is off on the main display.
When you sit on the seat, the toilet seat heater is turned on temporarily and
the seat is warmed in about 15 minutes.
➞
You can turn it "OFF" if the energy saver feature is "ON".
22, 23
24, 25
●
Have you been seated for a long time?
• After about 20 minutes of sitting, the temperature starts going down, and
after about 1 hour, the toilet seat heater is turned "OFF".
➞
Stand up from the seat and then use again.
●
Did you put anything on the toilet seat or the toilet lid?
➞
Remove anything placed on top of the toilet seat or lid.
-
-
●
Is a toilet lid or seat cover installed?
➞
Remove any covers.
11
Energy Saver
Trouble Please check
Ref.
Page
The energy saver LED
does not light up
●
Did you unplug the power plug or was there a power outage?
The "Energy saver" LED on the main display may go off when the power is
turned on even if the energy saver feature is "ON".
(It will turn on within about 24 hours since the setting is retained.)
-
The timer energy saver
feature is not working
●
Did you replace the remote control batteries?
"Timer energy saver" may be canceled when the batteries are replaced.
➞
Set the timer energy saver again at the time you want to start it.
25
The auto energy saver
feature is not working
●
Because the function takes several days learning the usage conditions before
starting energy saver, the amount of energy saving may be low, depending
on the frequency of use.
➞
Check the energy saver setting.
22, 23
Deodorizer
Trouble Please check
Ref.
Page
The deodorizer seems
to be not working
●
Is "Deodorizer" set to "OFF"? ➞ Set to "ON".
●
Even after sitting down, you do not hear operation sounds.
➞
Sit back on the toilet seat.
If you hear an operation sound when you sit on the toilet seat.
➞
Clean the deodorizing filter.
29
-
36
A strange odor is
emitted
●
Are you using an air freshener or deodorizer that you purchased separately?
•
Doing so may reduce the effectiveness of the product's deodorizer or cause strange odors.
➞
Remove the air freshener or deodorizer.
-
The auto power deodorizer
feature is not working
●
Is "Auto power deodorizer" set to "OFF"? ➞ Set to "ON".
●
It starts about 10 seconds after you stand up from the toilet seat.
29
-
Sanitary
Trouble Please check
Ref.
Page
The Wand CLEAN
LED does not light up
●
If the "Wand CLEAN" LED does not light up, it is time to replace the component
that generates "EWATER+". Consult the installer, seller, or TOTO customer service.
(see contact information on the back cover.)
-
Others
Trouble Please check
Ref.
Page
Water is leaking from the
plumbing connections
●
If the nut of the connecting pipe is loosened, retighten it by hand. (Do not use any tool.)
➞
If the water leak does not stop, close the shutoff valve and consult with
TOTO customer service. (see contact information on the back cover.)
-
The main unit is
unstable
●
There is clearance between the toilet seat cushion and the bowl unit for activating the seat
switch. When you sit on the toilet seat, the toilet seat subsides slightly to activate the seat switch.
●
Are the bolts that anchor the main unit loose?
➞
Remove the main unit and then firmly tighten the base plate bolts.
11
34, 35
The main unit makes
a sound
When sitting on the toilet seat
●
When "Pre-mist" is "ON", you hear operation sounds for preparing the pre-mist
or spraying mist in the bowl unit.
➞
You can turn it "OFF".
16
28
When moving away from the bowl unit after use
●
When "Auto power deodorizer" is "ON", operation sounds are made while the
deodorizing power increases for 60 seconds after you stand up from the toilet seat.
➞
You can turn it "OFF".
●
If "Auto wand CLEAN" is "ON" and you use the cleansing functions (e.g., Rear cleansing and
Front cleansing), you may hear that the wand is extended and cleaned with "EWATER+".
➞
You can turn it "OFF".
29
28
When not using the product (e.g., at night)
●
If "Auto wand CLEAN" is "ON" and you do not use the cleansing functions (e.g., Rear
cleansing and Front cleansing) for about 8 hours, you will hear that the wand is cleaned
with "EWATER+" and then the remaining water is drained from inside the product.
➞
You can turn it "OFF".
28
You feel air in the bowl unit
when sitting on the toilet seat
●
A mist is sprayed inside the bowl unit to make it more diffi cult for dirt to adhere
when sitting on the toilet seat. You may feel air when a mist is sprayed.
➞
You can turn it "OFF".
-
28
44 45
Reference
Specifi cations
Item
SW3084T40
SW3084
Rated power supply AC 120 V, 60 Hz
Rated power consumption 403 W
Maximum power consumption
*1
512 W
Type of water heater Tank type
Power cord length 3.93 ft (1.2 m)
Water protection level IPX4
Cleansing
Spray
volume
Rear cleansing
Approx. 0.07-0.11 gal / min (Approx. 0.27-0.43 L / min)
<at 29 PSI (0.20 MPa) water pressure>
Rear soft cleansing
Approx. 0.07-0.11 gal / min (Approx. 0.27-0.43 L / min)
<at 29 PSI (0.20 MPa) water pressure>
Front cleansing
Approx. 0.08-0.11 gal / min (Approx. 0.29-0.43 L / min)
<at 29 PSI (0.20 MPa) water pressure>
Water temperature Adjustable temperature range : OFF, about 95-104 °F (about 35-40 °C)
Toilet tank capacity Approx. 0.13 gal (Approx. 0.49 L)
Heater capacity 225 W
Safety device Temperature fuse, anti-idling fl oat switch
Backfl ow prevention device Vacuum breaker, Check valve
Heated
seat
Surface temperature
Adjustable temperature range : OFF, about 82-97 °F (about 28-36 °C)
(Auto energy saver : about 79 °F (about 26 °C))
Heater capacity 48 W
Safety device Temperature fuse
Deodorizer
Method O
2
deodorization
Airfl ow volume
Normal mode : Approx. 3.18 ft
3
/ min (Approx. 0.09 m
3
/ min)
Power mode : Approx. 5.65 ft
3
/ min (Approx. 0.16 m
3
/ min)
Power consumption Normal mode : Approx. 1.7 W, Power mode : Approx. 5.3 W
Warm air
dryer
Warm air temperature
*2
Adjustable temperature range : about 95-140 °F (about 35-60 °C)
Airfl ow volume Approx. 8.83 ft
3
/ min (Approx. 0.25 m
3
/ min)
Heater capacity 347 W
Safety device Temperature fuse
Water supply pressure
Minimum required water pressure : 7.25 PSI (0.05 MPa) <dynamic>
Maximum water pressure : 108.78 PSI (0.75 MPa) <static>
Water supply temperature 32-95 °F (0-35 °C)
Working ambient temperature 32-104 °F (0-40 °C)
Dimensions
W 1.26 ft × D 1.74 ft × H 0.48 ft
W 383 mm × D 530 mm× H 147 mm
Weight About 11 lb (About 5 kg)
*1 Maximum power consumption for warm water or heated toilet seat.
*2 Temperature around the warm air outlet measured by TOTO.
●
When disposing of this product, please follow your local or state guidelines for proper disposal.
1. TOTO warrants its products to be free from defects in materials and workmanship during normal use when properly installed
and serviced, for a period of one (1) year from date of purchase. This limited warranty is extended only to the ORIGINAL
PURCHASER of the product and is not transferable to any third party, including but not limited to any subsequent purchaser
or owner of the product. This warranty applies only to TOTO product is purchased and installed in USA and Canada.
2. TOTO's obligations under this warranty are limited to repair, replacement or other appropriate adjustment, at TOTO's option,
of the product or parts found to be defective in normal use, provided that such product was properly installed, used and
serviced in accordance with instructions.
TOTO reserves the right to make such inspections as may be necessary in order to determine the cause of the defect. TOTO
will not charge for labor or parts in connection with warranty repairs or replacements. TOTO is not responsible for the cost of
removal, return and/or reinstallation of the product.
3.This warranty does not apply to the following items:
a) Damage or loss sustained in a natural calamity such as fire, earthquake, flood, thunder, electrical storm, etc.
b) Damage or loss resulting from any accident, unreasonable use, misuse, abuse, negligence, improper care, or maintenance
of the product.
c) Damage or loss resulting from sediments or foreign matter contained in a water system.
d) Damage or loss resulting from the quality of water in the region where the product is used.
e) Damage or loss resulting from improper installation or from installation of the product in a harsh and/or hazardous
environment, or improper removal, repair or modification of the product. This includes locations where the water pressure
is above local codes or standards. (NOTE : Product model codes allow a maximum of 80 PSI. Check local codes or
standards for requirements).
f) Damage or loss resulting from electrical surges or lightning strikes or other acts which are not the fault of TOTO or which
the product is not specified to tolerate, including failure to use the factory equipped cord and plug or use of a loose or faulty
electrical outlet or use of a current or socket other than a 120V, 60Hz electrical current from a GFI (ground, fused) socket.
g) Damage or loss resulting from normal and customary wear and tear, such as gloss reduction, scratching or fading over
time due to use, cleaning practices or water or atmospheric conditions, including but not limited to, the use of bleach, alkali,
acid cleaners, dry (powder) cleaners or any other abrasive cleaners or the use of metal or nylon scrubbers.
4. If the Danger Label which has been placed over the seams on the back of the product’s top unit is broken or otherwise not
intact, this limited warranty is void.
5. In order for this limited warranty to be valid, proof of purchase is required. TOTO encourages warranty registration upon
purchase to create a record of product ownership at http://www.totousa.com. Product registration is completely voluntary and
failure to register will not diminish your limited warranty rights.
6. If the product is used commercially or is installed outside of USA and Canada, TOTO warrants the product to be free from
defects in materials and workmanship during normal use for one (1) year from the date of installation of the product, and all
other terms of this warranty shall be applicable except the duration of the warranty.
7. This warranty gives you specific legal rights. You may have other rights which vary from state to state, province to province or
country to country.
8. To obtain warranty repair service under this warranty, you must take the product or deliver it prepaid to a TOTO service
facility together with proof of purchase (original sales receipt) and a letter stating the problem, or contact a TOTO distributor
or products service contractor, or write directly to TOTO U.S.A., INC., 1155 Southern Road, Morrow, GA 30260 (888)
295-8134 or (678) 466-1300, if outside the U.S.A. If, because of the size of the product or nature of the defect, the product
cannot be returned to TOTO, receipt by TOTO of written notice of the defect together with proof of purchase (original sales
receipt) shall constitute delivery. In such case, TOTO
may choose to repair the product at the purchase'r s location or pay to
transport the product to a service facility.
WARNING! TOTO shall not be responsible or liable for any failure of, or damage to, this product caused by either
chloramines in the treatment of public water supply or cleaners containing chlorine (calcium hypochlorite).
NOTE: The use of a high concentrate chlorine or chlorine related products can seriously damage the fittings. This damage
can cause leakage and serious property damage.
THIS WRITTEN WARRANTY IS THE ONLY WARRANTY MADE BY TOTO. REPAIR, REPLACEMENT OR OTHER
APPROPRIATE ADJUSTMENT AS PROVIDED UNDER THIS WARRANTY SHALL BE THE EXCLUSIVE REMEDY
AVAILABLE TO THE ORIGINAL PURCHASER. TOTO SHALL NOT BE RESPONSIBLE FOR LOSS OF THE PRODUCT OR
FOR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OR EXPENSES INCURRED BY THE ORIGINAL
PURCHASER, OR FOR LABOR OR OTHER COSTS DUE TO INSTALLATION OR REMOVAL, OR COSTS OF REPAIRS
BY OTHERS, OR FOR ANY OTHER EXPENSE NOT SPECIFICALLY STATED ABOVE. IN NO EVENT WILL TOTO'S
RESPONSIBILITY EXCEED THE PURCHASE PRICE OF THE PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ANY IMPLIED WARRANTIES, INCLUDING THAT OF MERCHANTABILITY OR FITNESS FOR USE OR
FOR A PARTICULAR PURPOSE, ARE EXPRESSLY DISCLAIMED. SOME STATES DO NOT ALLOW LIMITATIONS ON
HOW LONG AN IMPLIED WARRANTY LASTS, OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION AND EXCLUSION MAY NOT APPLY TO YOU.
Limited Warranty
46 47
Reference
