FOR GENERAL INFORMATION, QUESTIONS, AND INQUIRIES: Please visit our website at www1.nyc.gov/dep or call 311
THE CITY OF NEW YORK
Rev. 02//2022
DEPARTMENT OF ENVIRONMENTAL PROTECTION
Bureau of Environmental Compliance
59-17 Junction Boulevard, 9
th
Floor, Flushing, New York 11373
Records Control (718) 595–3855
Industrial Work Permit Application
• Login to DEP online CATS: www.nyc.gov/dep/cats
• After Login, select the bottom right button “Industrial Work Permits, Inspection Requests (CO),
Amendments & Affidavits”
• You will be directed to the “My Requests” menu tab
To convert an existing Registration to a Work Permit:
• Click on the dropdown menu for “Select Request Type” as “Industrial Work Permit”.
• Click the “Create” button.
• Enter the Application ID (e.g., PA001170 or PB000112 without the ending Alphabet).
• Click the “Continue” button.
• Complete the information in each field. Mandatory fields on the request form are marked with an
asterisk. (i.e., Owner’s Email Address).
• Review all the information
• Under “Fee Information”: Select “Yes” or “No” for both “Is it a government owned property?” and
“Fee Waiver” status.
• If you’ve selected “Yes”, select the government agency and provide proof. Upload document(s)
from the “My Requests” tab.
• Once completed, click both the “Certification Checkbox” and the “Save” or “Save & Submit” button.
For a New Industrial Work Permit:
• Click on the dropdown menu for “Select Request Type” as “Industrial Work Permit”.
• Click the “Create” button.
• Complete the information in each field. Mandatory fields on the request form are marked with an
asterisk. (i.e., Owner’s Email Address).
• Review all the information.
• Under “Fee Information”: Select “Yes” or “No” for both “Is it a government owned property?” and
“Fee Waiver” status.
• If you’ve selected “Yes”, select the government agency and provide proof. Upload document(s)
from the “My Requests” tab.
• Once completed, click both the “Certification Checkbox” and the “Save” or “Save & Submit” button.
To attach documents (PDF only), accessible from the “My Requests” menu:
• Locate the application number/request ID. Click the PDF icon to attach a file.
• Click “Add Attachment” (Only PDF files with a filename that is less than 40 characters including spaces
can be uploaded.)
• Once the documents are attached, click the “My Requests” tab on top left corner.
Submit Application and Payment, accessible from the “My Requests” menu:
• Click the “Submit” icon (last icon in the list with a green forward arrow).
Proceed with processing the payment. Detailed steps for payment are provided in the CATS Payment
document.
• The applicant & owner will receive an automated email upon successful submission.
For assistance, please call 718-595-3855 or email us at
Catsfe[email protected]c.gov
FOR GENERAL INFORMATION, QUESTIONS, AND INQUIRIES: Please visit our website at www1.nyc.gov/dep or call 311
THE CITY OF NEW YORK
Rev. 02//2022
DEPARTMENT OF ENVIRONMENTAL PROTECTION
Bureau of Environmental Compliance
59-17 Junction Boulevard, 9
th
Floor, Flushing, New York 11373
Records Control (718) 595–3855
Industrial Work Permit Application – Checklist
Industrial Work Permit Application – All applicants must complete Part I and one section from the following
source categories:
• Dry Cleaning Machine - Part II
• Spray Booth or Spray Area - Part III
• Other Industrial Process (i.e., woodworking, jewelry polishing) - Part IV
• Combustion Source (Engines, Generators, Dryers, Ovens) – Part V
• Combined Heat & Power – Part VI
Emission Calculations – Provide all assumptions and sample calculations.
Required Drawings
• Drawings – are to be drawn to scale on no larger than 11” x 17” and not smaller than 8 ½” x 11”. All
submitted drawings must be legible.
• Equipment Room layout – location and dimensions of equipment, controls, vapor barrier enclosure,
exhaust fans, fresh air intake
• Plot Plan – For the building or lot containing the industrial equipment, indicate property lines, street
names, elevation of roof lines above grade, include building zone (i.e.: M-1, M-3), Block and Lot
numbers, minimum distance to the nearest receptor and indicate North direction. Identify all filed DEP
emission points with Emission ID number, Application number (PA/PB/PW/PR/CA/CB/CR/CW), heights
above roof and grade for all permitted sources.
Additional Documents
• Manufacturer Specification/Catalogue Cut Sheet for controls and exhaust fan including maximum
flowrate of the unit.
• For Dry Cleaning Machine:
• NYS DEC Air Facility Registration.
• Copy of DOB and FDNY Permits must be provided for issuance of Certificate of Operation.
FOR GENERAL INFORMATION, QUESTIONS, AND INQUIRIES: Please visit our website at www1.nyc.gov/dep or call 311
THE CITY OF NEW YORK
Rev. 02//2022
DEPARTMENT OF ENVIRONMENTAL PROTECTION
Bureau of Environmental Compliance
59-17 Junction Boulevard, 9
th
Floor, Flushing, New York 11373
Records Control (718) 595–3855
Online Application Form
FOR GENERAL INFORMATION, QUESTIONS, AND INQUIRIES: Please visit our website at www1.nyc.gov/dep or call 311
THE CITY OF NEW YORK
Rev. 02//2022
DEPARTMENT OF ENVIRONMENTAL PROTECTION
Bureau of Environmental Compliance
59-17 Junction Boulevard, 9
th
Floor, Flushing, New York 11373
Records Control (718) 595–3855
FOR GENERAL INFORMATION, QUESTIONS, AND INQUIRIES: Please visit our website at www1.nyc.gov/dep or call 311
THE CITY OF NEW YORK
Rev. 02//2022
DEPARTMENT OF ENVIRONMENTAL PROTECTION
Bureau of Environmental Compliance
59-17 Junction Boulevard, 9
th
Floor, Flushing, New York 11373
Records Control (718) 595–3855
FOR GENERAL INFORMATION, QUESTIONS, AND INQUIRIES: Please visit our website at www1.nyc.gov/dep or call 311
THE CITY OF NEW YORK
Rev. 02//2022
DEPARTMENT OF ENVIRONMENTAL PROTECTION
Bureau of Environmental Compliance
59-17 Junction Boulevard, 9
th
Floor, Flushing, New York 11373
Records Control (718) 595–3855
FOR GENERAL INFORMATION, QUESTIONS, AND INQUIRIES: Please visit our website at www1.nyc.gov/dep or call 311
THE CITY OF NEW YORK
Rev. 02//2022
DEPARTMENT OF ENVIRONMENTAL PROTECTION
Bureau of Environmental Compliance
59-17 Junction Boulevard, 9
th
Floor, Flushing, New York 11373
Records Control (718) 595–3855
FOR GENERAL INFORMATION, QUESTIONS, AND INQUIRIES: Please visit our website at www1.nyc.gov/dep or call 311
THE CITY OF NEW YORK
Rev. 02//2022
DEPARTMENT OF ENVIRONMENTAL PROTECTION
Bureau of Environmental Compliance
59-17 Junction Boulevard, 9
th
Floor, Flushing, New York 11373
Records Control (718) 595–3855
FOR GENERAL INFORMATION, QUESTIONS, AND INQUIRIES: Please visit our website at www1.nyc.gov/dep or call 311
THE CITY OF NEW YORK
Rev. 02//2022
DEPARTMENT OF ENVIRONMENTAL PROTECTION
Bureau of Environmental Compliance
59-17 Junction Boulevard, 9
th
Floor, Flushing, New York 11373
Records Control (718) 595–3855
FOR GENERAL INFORMATION, QUESTIONS, AND INQUIRIES: Please visit our website at www1.nyc.gov/dep or call 311
THE CITY OF NEW YORK
Rev. 02//2022
DEPARTMENT OF ENVIRONMENTAL PROTECTION
Bureau of Environmental Compliance
59-17 Junction Boulevard, 9
th
Floor, Flushing, New York 11373
Records Control (718) 595–3855
FOR GENERAL INFORMATION, QUESTIONS, AND INQUIRIES: Please visit our website at www1.nyc.gov/dep or call 311
THE CITY OF NEW YORK
Rev. 02//2022
DEPARTMENT OF ENVIRONMENTAL PROTECTION
Bureau of Environmental Compliance
59-17 Junction Boulevard, 9
th
Floor, Flushing, New York 11373
Records Control (718) 595–3855
FOR GENERAL INFORMATION, QUESTIONS, AND INQUIRIES: Please visit our website at www1.nyc.gov/dep or call 311
THE CITY OF NEW YORK
Rev. 02//2022
DEPARTMENT OF ENVIRONMENTAL PROTECTION
Bureau of Environmental Compliance
59-17 Junction Boulevard, 9
th
Floor, Flushing, New York 11373
Records Control (718) 595–3855
FOR GENERAL INFORMATION, QUESTIONS, AND INQUIRIES: Please visit our website at www1.nyc.gov/dep or call 311
THE CITY OF NEW YORK
Rev. 02//2022
DEPARTMENT OF ENVIRONMENTAL PROTECTION
Bureau of Environmental Compliance
59-17 Junction Boulevard, 9
th
Floor, Flushing, New York 11373
Records Control (718) 595–3855
Instructions on Filling Out Form
Cell # Form Field Name Help Text
1A Facility Name (If any)
If subject premise has a name which is displayed on the store front
sign or is commonly known (e.g., “ABCD” Garden Apartments)
indicate such name. If no such name exists, indicate “none”.
1B Facility
Select “NEW” if equipment will be housed in a new structure.
Select “EXISTING” if equipment will be housed in an existing
structure.
1C Facility Location
Complete premise address of combustion equipment being filed
for.
1C House No.
Do not insert any floor no./suite no.
1C Street Address
Do not abbreviate street address.
1D Floor / Suite No. (If any)
Enter floor number or suite number or room number if available.
1E Borough
Select from the dropdown menu.
1F State
Enter the State (NY).
1G Block
Block number as seen from DOB for address entered above
1H Lot
Lot number as seen from DOB for address entered above
1I Zip Code
1J Building Identification Number (BIN)
If premise identified is part of a housing or commercial complex
where buildings have identifying numbers and/or letters, provide
same.
1K Equipment Location
Identify physical location, by floor number, of combustion
equipment within premise (e.g., cellar).
1L
Is this equipment a replacement for
equipment recently certified?
Select “YES” if equipment is a replacement for equipment that is
currently certified. Select “NO” if the equipment is not a
replacement.
1M
If YES, provide the installation number of the
equipment it is replacing (PA/PB):
If this equipment is a replacement for equipment currently
certified, please provide the Installation Number of the equipment
it is replacing. (Renewal of the existing Certificate of Operation
(CO) is required as long as the equipment is operable. The existing
CO will be cancelled once we receive a written notification within
20 days that the equipment is dismantled or rendered inoperable.)
1N
Is this a legalized source?
Indicate whether or not this is a legalized source.
1O Facility Classification
Classification based on type of use. Check only one appropriate
box. Example: Hospital owned residence, check residential College
owned dormitory, check residential College owned power plant,
check utility.
2A
Owner’s Name
Full legal name of owner of premise.
2B
Owner’s Address
Owner’s complete mailing address.
2B
House No.
Do not insert any floor no./suite no.
2B
Street Address
Do not abbreviate street address.
2C
Floor / Suite No. (If any)
Enter floor number or suite number or room number if available.
2D
Borough / City
Enter the borough or city if outside NY.
FOR GENERAL INFORMATION, QUESTIONS, AND INQUIRIES: Please visit our website at www1.nyc.gov/dep or call 311
THE CITY OF NEW YORK
Rev. 02//2022
DEPARTMENT OF ENVIRONMENTAL PROTECTION
Bureau of Environmental Compliance
59-17 Junction Boulevard, 9
th
Floor, Flushing, New York 11373
Records Control (718) 595–3855
Cell # Form Field Name Help Text
2E State
Enter the State (NY)
2F Zip Code
2G Telephone
Enter the primary number of the Owner.
2H Fax
Fax number of the Owner.
2I Owner’s Email Address
Email address to facilitate future correspondences and send out
renewal reminders.
3A Name of P.E or R. A
Full name of Professional Engineer or Registered Architect
authorized to file the Industrial Process Equipment Application
Form.
3B NYS License Number
New York State Professional Engineer’s or R. A’s License Number.
3C P.E. Email Address
P.E. or R.A. email address for future correspondence.
3D Telephone
Telephone number of the Professional Engineer or R.A.
3E Fax
Fax number of the Professional Engineer or Registered Architect.
3F Company Name
Name of the company the P.E. or R.A. is employed with.
3G P.E. Address
Complete business address information of the Professional
Engineer.
3G House No.
Do not insert any floor no./suite no.
3G Street Address
Do not abbreviate street address.
3H City or Borough
Enter the borough or city if outside NY.
3I State
Enter the State (NY).
3J Zip Code
3K Name of Installer
If applicable, provide the full name of the installer authorized to
file the Industrial Process Equipment Application Form.
NYC Installer License Number
New York City Oil Burner Installer License Number.
Installer E mail Address
Installer email address for future correspondence.
Telephone
Telephone number of the installer.
Fax
Fax number of the installer.
Company Name
Name of the company the installer is employed with.
Installer Address
Complete the business address information of the installer.
House No.
Do not insert any floor no./suite no.
Street Address
Do not abbreviate street address.
City or Borough
Enter the borough or city if outside NY.
State
Enter the State (NY)
Zip Code
4A Is it a government owned property?
If the premise where the equipment is located has tax exemption
as per the Department of Finance, then select “YES”. Additionally,
provide the DOF tax exemption documentation.
Agency Name
Select the appropriate agency name.
Fee Waiver
If fee is waived, select “Yes”
Fee Waiver Reason
Select or mention detailed fee waiver reason.
Type of Equipment to be Permitted?
Select the appropriate source category
FOR GENERAL INFORMATION, QUESTIONS, AND INQUIRIES: Please visit our website at www1.nyc.gov/dep or call 311
THE CITY OF NEW YORK
Rev. 02//2022
DEPARTMENT OF ENVIRONMENTAL PROTECTION
Bureau of Environmental Compliance
59-17 Junction Boulevard, 9
th
Floor, Flushing, New York 11373
Records Control (718) 595–3855
Cell # Form Field Name Help Text
5A
What type of business is being conducted
at this equipment location?
Specify what type of industrial process is being conducted at this
location. If “Other” is selected, specify the type of industrial process.
5B
What emission sources are present at this
facility?
Indicate all sources of emissions that are present at the facility. For
example, if an auto body shop has a spray booth equipped with a heater,
both the spray booth and the heater should be listed as sources of
emissions.
5C Building Type
If the industrial process is operating in a stand-alone building without
any other occupants (commercial or residential), select “Stand Alone”.
If there are other occupants in the building, select “Mixed Use”.
5D
If mixed use, check all boxes that describe
the other types of tenants
If the building is a mixed-use building, select all the boxes that describe
the other tenants.
6A Emission Point ID
Provide the emission point ID for this stack.
6B Ground Elevation (ft)
Height of the location of equipment from mean sea level.
6C Height Above Structures (ft)
The distance from stack exit to the roof of the building (in feet).
6D Stack Height (ft) The distance from the ground level to the top of the stack (in feet).
6E Inside Diameter (in)
Equivalent radial (circular) diameter of stack. Convert rectangular
dimensions to equivalent radial diameter (in inches).
6F
Exit Velocity (f/s)
Exhaust gas exit velocity (in feet per second).
6G Exit Flow Rate (ACFM)
Exhaust gas exit flow rate in actual cubic feet per minute (ACFM). The
standard conditions are 60°F and 14.6 psi.
6H Exit Temperature (degree F)
Specify the exhaust temperature. Typically, this is the room
temperature.
6I Fan Manufacturer
If an exhaust fan is present, provide the manufacturer’s name.
6J
Fan Model Number
If an exhaust fan is present, provide the model number.
6K Number of Units
Specify the number of exhaust fans of this make/model present in
the facility.
6L
Total ACFM/Unit
Specify the ACFM of each unit.
6M
Fan Diameter (in)
Indicate the diameter of the fan (in inches).
6N
Fan Motor (HP/RPM)
Indicate the capacity of the fan (in HP and RPM).
6O Dimensions of Area Ventilated by Fan
Provide the dimensions of the area that is ventilated by the fan. If the fan
is attached to an enclosed structure, such as a spray booth or dry-
cleaning unit equipped with a vapor barrier, provide the dimensions of
this space.
6P
Are multiple pieces of equipment
exhausted to this stack?
If more than one piece of equipment is exhausted to the stack described
above, select “YES”. If only one piece of equipment is exhausted to the
stack, select “NO”.
6Q If Yes, list all pieces of equipment
If selected “YES” in previous question, list all of the pieces of
equipment that are exhausted to the stack.
FOR GENERAL INFORMATION, QUESTIONS, AND INQUIRIES: Please visit our website at www1.nyc.gov/dep or call 311
THE CITY OF NEW YORK
Rev. 02//2022
DEPARTMENT OF ENVIRONMENTAL PROTECTION
Bureau of Environmental Compliance
59-17 Junction Boulevard, 9
th
Floor, Flushing, New York 11373
Records Control (718) 595–3855
Cell
#
Form Field Name Help Text
7A
Does this equipment have an emission
control?
If emission control equipment is used, select “Yes”. If no emission
control equipment is used, select “No”.
7B Is the control part of the equipment?
If the control equipment is part of the industrial equipment, select
“Yes”. If the control equipment is a separate unit, select “No”.
7C Type(s) of pollutant(s) controlled
Select the type(s) of pollutant(s) that are controlled by the emission
control equipment. If “Other” is selected, list the name of the
pollutant.
7D Emission Control(s)
Select the type(s) of emission control device(s) used at the facility. If
“Other” is selected, list the name of the control device.
7E Description of Control Device(s)
Provide a more detailed description of the emission control device(s).
For example, if “Filter” was selected, provide the filter material.
7F Contaminant
List the name and CAS number of all contaminants emitted by this
equipment.
7G Emissions
Provide annual and hourly emissions using emission factors and
maximum quantity per year and per hour.
7H Detailed Calculations
Provide a detailed description of calculations for emission values
above with equations and assumptions. This can be attached as a
separate document.
8
Is there a heater?
If heater is used, select “Yes”. If no heater is used, select “No”.
8A
Is the heater a separate unit?
If heater is in separate unit, select “Yes”, else select “No”.
8B
Input
Specify the input of the heater in BTU/Hr
8C
Output
Specify the output of the heater in BTU/hr
8D
Firing rate
Specify the firing rate of the heater in GPH/CFH
8E
Manufacturer
Specify the Manufacturer of the heater
8F
Model Number
Specify the name of the manufacturer model number of the heater
8G
Fuel Type
Select either “No.2 Fuel” or “Natural Gas”
9A Installation Number
If additional permitted equipment is in the facility specify the
instillation number
9B Descriptions
If additional permitted equipment is in the facility, describe the
equipment
9C Certificate of Operation Expiration Date
If additional permitted equipment is in the facility, state the expiration
date of each certificate of operation.
10A Manufacturer
Specify the Dry-Cleaning equipment manufacturer
10B Model Number
Specify the Dry-Cleaning equipment model number
10C Serial Number
Specify the Dry-Cleaning equipment serial number
10D Year of Manufacture
Specify the Dry-Cleaning equipment year of manufacture
10E Date of Installation
Specify the Dry-Cleaning equipment date of installation
10F Capacity (lbs/load)
Specify the Dry-Cleaning equipment max load capacity in pounds.
10G Machine Type
Specify Machine Type for dry cleaning (e.g., Perchloroethylene 4
th
generation, HydroCarbon)
10H Number of Machines
Specify the number of identical machines
10I Solvent Type
Specify the solvent type (e. g., DF-2000 Fluid Perchloroethylene)
FOR GENERAL INFORMATION, QUESTIONS, AND INQUIRIES: Please visit our website at www1.nyc.gov/dep or call 311
THE CITY OF NEW YORK
Rev. 02//2022
DEPARTMENT OF ENVIRONMENTAL PROTECTION
Bureau of Environmental Compliance
59-17 Junction Boulevard, 9
th
Floor, Flushing, New York 11373
Records Control (718) 595–3855
Cell
#
Form Field Name
Help Text
10J Spill Pan
If machine is equipped with spill pan, select “Yes” else select “No”.
10K Exhaust Systems
Check appropriate items:
Vapor Barrier Installed
General Exhaust ventilation system Installed
10L Maximum operating Temp for machine
For Hydrocarbon only, provide the maximum operating temperature
inside machine drum in degrees Fahrenheit as specified by
manufacturer. This should not greatly exceed solvent flash point.
10M Is a sprinkler system installed in the facility?
If sprinkler system is installed, select “Yes” else select “No”.
11A Annual Solvent Consumption
Provide the annual solvent consumed in gallons per year.
11B Maximum Hourly Solvent Usage
Provide the maximum hourly solvent usage in gallons per hour
11C Loads/ day
Provide the number of loads per day
11D Operational days/year
Provide the number of operational days per year
12A Equipment Type
Select the type of equipment used for the spray booth. If “Other” is
selected, please specify.
12B Manufacturer
Specify the spray booth equipment manufacturer
12C Model Number
Specify the spray booth equipment model number
12D Date of Installation
Specify the date of installation of spray booth equipment
12E Type
Select the type of spray booth in the facility
12F Opening Height (ft)
Provide the opening height of the spray booth in feet
12G Opening Width (ft)
Provide the opening width of the spray booth in feet
13A Hours/day
Specify the operational hours per day
13B Days/Year
Specify the operational days per year
13C Waterwash Pump (HP)
Provide the horsepower of the waterwash pump
13D Water Flow Rate (gpm)
Provide the water flow rate of the pump in gallons per minute
13E Article(s) Sprayed
Check all that apply to article(s) sprayed in the spray booth. If “Other”
is selected, specify the article.
13F Method of Application
Check which method of application is used.
13G Gun Cleaning Method
Check which gun cleaning method is used.
13H Usage Information
Specify the type of material used, the product name and number,
pounds of VOC per gallon of material, and its usage.
15A Material Being Processed
Specify which material is processed
15B Maximum Hourly Processing Rate
Determine the maximum hourly processing rate of this material
15C Annual Amount of Material Processed
Determine the annual amount of material processed
15D Equipment Information
Describe the equipment information by filling out each field (e. g.,
manufacturer, model number)
15E Hours/day
Specify the hours per day the equipment is used
15F Operational days/year
Specify the operational days per year the equipment is used
16A Combustion Type
Select the appropriate combustion type from the drop-down menu
16B Manufacturer
Specify the manufacturer of the equipment
16C Model Number
Specify the model number of the equipment
16D Year of Installation
Specify the year of installation of the equipment
16Ea Number of Units
Determine the number of units of the equipment in the facility
FOR GENERAL INFORMATION, QUESTIONS, AND INQUIRIES: Please visit our website at www1.nyc.gov/dep or call 311
THE CITY OF NEW YORK
Rev. 02//2022
DEPARTMENT OF ENVIRONMENTAL PROTECTION
Bureau of Environmental Compliance
59-17 Junction Boulevard, 9
th
Floor, Flushing, New York 11373
Records Control (718) 595–3855
Cell
#
Form Field Name Help Text
16Eb Serial Numbers
Specify the serial number of each equipment
16F Engine Model Year
Specify the engine model year
16G EPA Engine Family Name
Specify the EPA Family Name (the 12-character number/letter
designation included on the engine nameplate)
16H EPA Tier
Specify which EPA Tier the equipment belongs to based off manual or
attach equivalency forms
16I
Displacement
Provide the engine displacement in liters
16J Fuel Type
Determine which fuel type is used for the equipment through the
drop-down menu
16K Maximum Fuel Delivery Rate
Determine the maximum fuel delivery rate in gallon per hour or cubic
feet per hour
16L
kW Rating
Provide the kW rating of the equipment
16M
Horsepower
Provide the horsepower of the equipment
16N
Gross Input
Provide the gross input in million BTU per hour
16O
Is exhaust stack adequate for all equipment
that vents to the stack?
Select “Yes” or “No”.
16P
Is there an induced fan?
Select “Yes” or “No”.
16Q Information pertaining to induced fan
If there is an induced fan, specify its location, manufacturer, model
and capacity.
16R
Primary Use
Describe the primary use of the combustion source with details.
16S
Noise Control
Provide information on the noise control of the source if applicable
16T
Hours/Day
Provide the number of hours per day the source is operational
16U
Day/Week
Provide the number of days per week it is operational
16V
Days/Year
Provide the number of days per year it is operational
17A Equipment Type
Select the equipment type for the Cogenerator (either gas turbine or
engine)
17B
Fuel Type
Select the fuel type used for the equipment
17C
Number of Identical Units
Provide the number of identical units
17D
Date of Installation
Provide the date of installation
17E
Manufacturer
Provide the manufacturer
17F
Model Number
Provide the model number
17G
Serial Number
Provide the serial number
17H Max Fuel Input (CFH/GPH/Lb./hr)
Provide the maximum fuel input in cubic feet per hour or gallons per
hour or pounds per hour
17I High Heating Value of Fuel
Provide the high heating value of fuel in BTU per hour or cubic feet per
hour or BTU per pound.
17J Max heat input
Provide the maximum heat input in million BTU per hour
17K Turbine / Engine Exhaust Temperature
Provide the turbine engine exhaust temperature in degrees
Fahrenheit
17L Total Gas Flow to the turbine
Provide the total gas flow to the turbine or engine in pounds per hour
17M Rated Power output
Provide the rated power output from the generator in KW
17N Efficiency (%)
Provide the efficiency as a percent
FOR GENERAL INFORMATION, QUESTIONS, AND INQUIRIES: Please visit our website at www1.nyc.gov/dep or call 311
THE CITY OF NEW YORK
Rev. 02//2022
DEPARTMENT OF ENVIRONMENTAL PROTECTION
Bureau of Environmental Compliance
59-17 Junction Boulevard, 9
th
Floor, Flushing, New York 11373
Records Control (718) 595–3855
Cell
#
Form Field Name Help Text
17O Do you have a duct burner?
Select “Yes” or “No”
17.2.
1D
Number of Identical Units
Provide the number of identical units for the heat recovery steam
generating unit (HRU)
17.2.
1E
Date of Installation
Provide the date of installation for the HRU
17.2.
1F
Manufacturer
Provide the manufacturer
17.2.
1G
Model Number
Provide the model number
17.2.
1H
Serial Number
Provide the serial number
17.2.
1I
Inlet Air Temperature
Provide the inlet air temperature in degrees Fahrenheit
17.2.
1J
Exhaust/Outlet Temperature
Provide the exhaust/ outlet temperature in degrees Fahrenheit
17.2.
1K
Water Flow
Provide the waterflow in pounds per hour
17.2.
1L
Water Pressure
Provide the water pressure in PSIG
17.2.
1M
Water Temperature at the inlet of the HRU
Provide the water temperature of the inlet of HRU in degrees
Fahrenheit
17.2.
1N
Water temperature at the outlet of the
HRU
Provide the water temperature of the outlet of the HRU in degrees
Fahrenheit
17.3.
1A
Steam Produced
Provide the steam produced from the auxiliary in pounds per hour
17.3.
1B
Steam Usage Information
Check the appropriate steam usage information
17.3.
1C
Steam Flow
Provide the steam flow of the auxiliary in pounds per hour
17.3.
1D
Steam Pressure
Provide the steam pressure in PSIG
17.4.
1A
Total Steam flow to the Steam Turbine
Provide the total steam flow to the steam turbine in pounds per hour
17.4.
1B
Steam Temperature at the Turbine Inlet
Provide the steam temperature at the turbine inlet in degrees
Fahrenheit
17.4.
1C
Steam Pressure at the Turbine Inlet
Provide the steam pressure at the turbine inlet in PSIG
17.4.
1D
Power Output
Provide the power output in KW or BTU per hour.